How do you reset the tire pressure sensor on a Honda Insight?
The tire pressure monitoring system (TPMS) on a Honda Insight resets by first ensuring all tires are inflated to the recommended cold pressures, then relearning the sensors either through a drive at highway speeds or via a manual reset if your model supports a TPMS button. The exact method varies by model year and trim, so use the approach that matches your vehicle.
Why TPMS resets matter
TPMS detects under-inflated tires and alerts you to safety risks. A reset or relearn aligns the system with the current tire pressures after inflation, rotation, or replacement. If the warning light remains on after inflating to the proper pressure, you may have a slow leak, a damaged sensor, or the need for a dealer reprogram.
Reset methods by Honda Insight model year
Older Honda Insight (2010–2014)
These models typically rely on a drive-to-learn calibration and usually do not have a dedicated TPMS reset button.
Follow these steps to recalibrate the TPMS on older Insights.
- Check and inflate all tires to the recommended cold pressures (found on the door jamb sticker or owner's manual).
- Drive on a clear, straight road at steady speeds above about 50 mph (80 km/h) for roughly 10 minutes to allow the system to relearn the sensor locations.
- After the drive, observe the TPMS light. If it goes out, calibration is complete. If it stays on, recheck tire pressures and inspect for leaks or damaged sensors; you may need professional service.
Driving at highway speeds is the primary method for this generation when a dedicated reset control is not present.
Newer Honda Insight (2019–present)
These models may offer a TPMS reset option or rely on drive-to-learn calibration. If your trim includes a reset button, follow the button-based steps; otherwise, use the drive-to-learn method described below.
Use these options to reset the TPMS on newer Insights.
Reset using a TPMS reset button (if equipped)
Some trims provide a TPMS reset button located near the steering column, glove box, or center console. If your vehicle has this button, use the following steps.
- Inflate all tires to the recommended cold pressures.
- Turn the ignition to ON with the engine OFF (or as specified in the owner’s manual).
- Locate and press and hold the TPMS reset button until the TPMS indicator light flashes slowly or twice, then release.
- Drive for 10–15 minutes at speeds above 30–40 mph (50–65 km/h) to complete the relearn; the light should go out when complete.
Button-based resets are the quickest when the feature is present, but not all trims include the reset button.
Drive-to-learn method (no reset button)
If your Insight lacks a TPMS reset button, you can still relearn the sensors by driving at steady highway speeds after inflating the tires to the correct pressures.
- Verify all tires are inflated to the manufacturer’s recommended cold pressures.
- Drive on a highway or long straight road at moderate speeds (roughly 50–60 mph / 80–97 km/h) for 10–20 minutes to allow the system to relearn the sensor locations.
- If the TPMS light goes out after the drive, calibration is complete. If it remains illuminated, recheck tire pressures and inspect for leaks or sensor damage; you may need professional service.
Drive-to-learn relies on normal driving to recalibrate the system and is the default method for models without a reset button.
What to do if the TPMS light stays on
First recheck all tire pressures with the tires cold and adjust to the recommended values. Look for slow leaks, punctures, or damaged valve stems. If pressures are correct and the light remains on, the TPMS sensors or control module may require inspection or reprogramming by a tire shop or Honda dealer.
Summary
Resetting the TPMS on a Honda Insight starts with correct tire pressures, followed by a relearn process. Depending on the model year and trim, you may either drive at highway speeds for a set period to recalibrate or use a dedicated TPMS reset button if equipped. If the warning persists after following the appropriate steps, seek professional assistance to diagnose sensor or system issues.
