How do you reset the window bounce back on a Ford Expedition?

If you're experiencing issues with the window bounce back on your Ford Expedition, there's a simple reset procedure you can follow to resolve the problem. This article will guide you through the steps to reset the window bounce back and restore proper functionality.

Understanding Window Bounce Back

The window bounce back feature is a safety mechanism in modern vehicles that prevents the window from closing completely if it detects an obstruction, such as a person's hand or object. This feature is designed to protect against accidental injuries or damage. However, if the system becomes miscalibrated or experiences a glitch, it can cause the window to bounce back unexpectedly, even when there's no obstruction.

Steps to Reset the Window Bounce Back

• Park your Ford Expedition on a level surface and apply the parking brake.


• Locate the window control switch for the window you want to reset. This is typically located on the driver's side door panel.


• Press and hold the window control switch in the "up" position until the window is fully closed.


• Continue holding the switch in the "up" position for an additional 2-3 seconds after the window is fully closed.


• Release the window control switch and wait for the window to fully open and close again. This completes the reset process.

After following these steps, the window bounce back feature should be reset, and the window should operate normally. If the issue persists, you may need to consult a professional mechanic or the Ford Expedition owner's manual for further troubleshooting.

Conclusion

Resetting the window bounce back on a Ford Expedition is a straightforward process that can be done quickly and easily. By following the steps outlined in this article, you can restore proper functionality to your vehicle's windows and ensure a safe and smooth driving experience.

How do you reset the power windows bounce back feature?

Press and hold the window control switch until the window is fully open. Keep the switch pressed for a few seconds.

How do you fix a bounce back on a Ford window?

To fix a Ford window's bounce-back issue, you need to reset the window's motor by holding the switch down until the window is fully open, then continuing to hold it for a few seconds. Next, lift the switch to close the window and hold it for a few seconds after it's closed. You can also try opening the window, pressing and holding the switch until it's fully closed, then holding it for a few more seconds, and repeating the process. 
Method 1: Standard reset

1. Open the window completely by holding the switch down. 
2. Continue to hold the switch in the down position for a few seconds after the window is fully open. 
3. Now, lift and hold the switch up until the window is fully closed. 
4. Continue to hold the switch in the up position for a few seconds after the window is fully closed. 
5. Repeat the process of holding the switch down and then up for a few seconds each time to fully retrain the window motor. 

Method 2: Reset the bottom and top positions

1. Turn the vehicle's ignition to the "on" position without starting the engine. 
2. Press and hold the window switch down until the window is completely open. Release the switch, then press and hold it down for another two seconds to register the bottom position. 
3. Hold the switch up to close the window. The window may bounce back, which is normal. Continue to hold the switch up until it's fully closed and for another two seconds after it stops moving. This will register the top position. 
4. Test the window's auto-up feature to see if the issue is resolved. 

Method 3: If the problem persists

• Clean the rubber seals around the window with a mild detergent and a rag, then wipe them dry. 
• Spray the seals with a dry silicone lubricant to help the window move more smoothly. 
• If the reset doesn't work, try leaving the window in the fully closed position and let it sit for at least 48 hours, as a low battery can sometimes cause this issue. 
• If the problem continues, consider consulting your owner's manual or a Ford dealership for further assistance. 

How do I reset my Ford power window?

To reset a Ford power window, roll the window all the way down and hold the switch for a few seconds. Then, roll the window all the way up and hold the switch again for a few seconds to complete the reset. This process recalibrates the window's limits and often fixes the "one-touch" or anti-pinch functions.
 
This video demonstrates how to reset Ford power windows: 38sDIY PintoYouTube · Apr 22, 2024
Step-by-step reset procedure

1. Turn the ignition to the "run" position. 
2. Lower the window completely by pulling and holding the switch down. Release the switch once the window is fully down. 
3. Continue holding the switch in the down position for a few seconds after the window stops moving. 
4. Now, raise the window completely by lifting and holding the switch up. Release the switch when it is fully closed. 
5. Keep the switch in the up position for a few seconds after the window is closed. 
6. Repeat for any other windows that need to be reset. 

Why this is necessary

• Battery issues: This reset is often needed after the vehicle's battery has been disconnected or gone flat. 
• "Bounce-back" feature: It can fix the issue where the window automatically closes, then reopens halfway, a safety feature that can sometimes be triggered incorrectly. 
• One-touch function: This procedure restores the "one-touch" up and down functions that may have stopped working. 

How do you reset the bounce back window on a Ford Expedition?

To reset the Ford Expedition window bounce-back feature, manually roll the window down while holding the switch, then pull and hold the switch up for a few seconds after it's fully closed. Repeat the process by holding the switch in the fully open position for a few seconds, then holding it for a few seconds after it's fully closed. If the one-touch feature still doesn't work, repeat the entire procedure for the affected window. 
Step-by-step reset procedure
This video demonstrates the steps to reset the window bounce back feature on a Ford Expedition: 56sTuned 2.7YouTube · Nov 17, 2023

1. Close the window (manual operation): Start with the affected window completely closed. 
2. Hold the switch down: Push and hold the window switch down until the window is fully open. Keep holding the switch for a few extra seconds after it opens. 
3. Hold the switch up: Lift and hold the switch up to close the window. Continue holding the switch for a few extra seconds after it is fully closed. 
4. Test the one-touch feature: Test the one-touch auto-up function. The window should now close without bouncing back. 
5. Repeat if necessary: If the window still doesn't close properly with the one-touch feature, repeat the entire procedure. Some models may require the reset to be completed within 30 seconds. 

Alternative methods

• If the window bounces back: If the window closes and then immediately bounces back down when trying to use the one-touch feature, immediately pull and hold the switch up for about 2-3 seconds. Then, try the full reset procedure again. 
• If you recently disconnected the battery: Disconnect the battery again, wait a few seconds, and then reconnect it. After doing this, you will need to perform the full reset procedure listed above for each window to reset its memory.