What is the part number for the Toyota Aqua ABS unit?
The exact part number for the Toyota Aqua ABS unit is not universal; it depends on factors such as model year, market, and whether the ABS is a standalone actuator/pump or part of a combined module. There is no single number that covers all Aqua variants.
To determine the correct part number, car owners and technicians typically reference the vehicle identification number (VIN), consult Toyota's official parts catalogs or a dealer system, and inspect the label on the ABS unit itself. This article explains how to locate the precise number and what to consider during replacement.
How the ABS parts for the Aqua are cataloged
The Aqua can share compatible components with other Toyota hybrids, but the official catalogs differentiate ABS actuators, pumps, and control modules. Because of market and generation differences, the same-looking unit may have different part numbers. Always verify against the exact Aqua variant you own.
Use these steps to identify the exact part number that fits your Aqua:
- Collect the vehicle identification number (VIN) from the vehicle or its registration documents.
- Access Toyota's official parts catalog or a dealer portal and search by VIN, model year, and market to pull the correct ABS part number.
- Inspect the label on the existing ABS unit (often on the actuator/pump or the module) for the printed part number and revision code.
- Cross-check the identified number(s) with the catalog to confirm compatibility with your Aqua's year, market, and braking system (ABS vs. ABS with EBD, etc.).
- Clarify whether you need an ABS actuator/pump assembly or an ABS control module, since some Aqua variants use integrated units.
Following VIN verification and label inspection will minimize the risk of ordering the wrong unit. When in doubt, contact a Toyota dealer or an authorized repair facility for confirmation before purchase.
Replacement options and considerations
There are multiple avenues for replacing an ABS unit, each with its own cost, warranty, and programming considerations. Here are the common routes and what to weigh for each:
- OEM new ABS actuator/pump assembly from Toyota, matched to your Aqua's VIN and market, with full factory warranty.
- OEM remanufactured ABS unit, often priced lower than new and still warranted, but verify the remanufacturer’s quality standards.
- Aftermarket or rebuilt ABS modules, which can be cheaper but may carry higher risk of compatibility or reliability issues; only use reputable suppliers and ensure proper compatibility with your vehicle’s system.
- Salvage yard or used units from similar Aqua models, contingent on exact part number match and hardware condition; always test or warranty when possible.
- Additional components and service needs (sensors, connectors, wiring harnesses, fluid, and potential ABS/ECU reprogramming) that may accompany the replacement.
Programming or initialization is often required for ABS/ECU units on modern Toyota hybrids. A dealer or qualified shop should perform any necessary coding to ensure the system communicates correctly with the vehicle and to avoid fault codes.
Summary
In short, there is no single, universal part number for the Toyota Aqua ABS unit. Accurate identification hinges on the car’s VIN, the year and market of the vehicle, and a direct check of the ABS unit’s label or the official Toyota parts catalog. Always verify with a dealer or trusted parts database, and consider warranty and programming needs when choosing a replacement route.
