How many catalytic converters are on a 2007 Ford Taurus?
The 2007 Ford Taurus typically has two catalytic converters. This dual-cat setup is standard for the US-market Taurus equipped with the 3.0L V6 Vulcan engine.
In this article, we detail the usual catalytic-converter count for the 2007 Taurus, explain why the arrangement exists, and note where variations can occur. While two converters are common for this model year, exact configurations can vary by market, trim, or aftermarket modifications.
Typical count and what that means
Most 2007 Taurus models with the 3.0L V6 Vulcan engine employ a dual-cat arrangement, meaning two catalytic converters are in the exhaust path—one for each bank of the V6. This setup helps meet emissions standards and maintain exhaust flow for a front-wheel-drive layout.
Before listing the common configuration, here are the key points to keep in mind about the dual-cat arrangement:
- Two catalytic converters in total, one for each bank of the V6 engine
- Each converter is part of a twin-exhaust arrangement and typically works with upstream and downstream oxygen sensors
In practice, two catalytic converters are standard for the 2007 Taurus in the United States, but always confirm for your specific vehicle by inspecting the exhaust or checking the VIN/service manual.
Market and engine variations
Variations can occur based on market, trim level, or aftermarket modifications. Some non-US markets or special editions may use different exhaust configurations, and aftermarket systems can alter the number or placement of catalytic converters. Always verify the exact setup for your vehicle using the VIN or official service documentation.
Where to find them and how to identify
In the typical dual-cat layout for the 2007 Taurus, the two catalytic converters are integrated into the exhaust path from each bank of the V6, usually located along the undercarriage sections of the vehicle. They are followed by the mid-pipe and muffler, with oxygen sensors positioned upstream and downstream to monitor catalytic efficiency.
Signs of trouble can include a check engine light, reduced performance, rough idle, poor fuel economy, or increased emissions. If you’re replacing or inspecting catalytic converters, consult a qualified mechanic to ensure proper installation and compliance with local emissions regulations.
Summary
In summary, the 2007 Ford Taurus commonly has two catalytic converters—one for each bank of the 3.0L V6 Vulcan engine. Variations can occur by market or aftermarket modifications, so always verify the exact configuration for your vehicle using the VIN or service records. Understanding the dual-cat setup can help with diagnostics, replacement planning, and emissions compliance.
How much does it cost to replace a catalytic converter on a Ford Taurus?
The average cost for a Ford Taurus Catalytic Converter Replacement is between $2,341 and $2,654.
What is the most common problem with Ford Taurus?
Top Ford Taurus Problems
- Engine Oil Pan Gasket May Leak.
- Engine Buck/Misfire at Freeway Speeds.
- Problem With Idle Air Bypass Valve May Cause Engine Performance Problems.
- Camshaft Sensor Magnet may Damage Synchronizers.
- automatic lights not working.
- Blown/Cracked Head Gasket Can Cause White Smoke From Exhaust.
How many catalytic converters does a Ford Taurus have?
The number of catalytic converters on a Ford Taurus varies by model year, but common configurations include two or three. Earlier models, like the 2002, often have three, while some later models may have two or two primary and two secondary converters.
- 2002 Models: Typically equipped with three catalytic converters.
- 2004 Models: Often have two main converters, or sometimes four, depending on the specific trim and engine setup.
- Later Models (2013-2019): The 3.5L V6 non-turbo models, for example, have a specific "Bank 2" converter, and there will be a corresponding "Bank 1" converter as well, for a total of at least two.
- Some V6 engines: Some V6 engines, like the 2003 SE model, have a single converter on one of the banks.
To determine the exact number for your vehicle, it is best to consult your owner's manual or have a professional mechanic inspect the exhaust system.
What are two symptoms of a failed catalytic converter?
Check for symptoms.
As mentioned, common symptoms of a clogged catalytic converter include an illuminated check engine light, trouble starting the car, poor acceleration, a smell of sulfur or rotten eggs, engine misfires, and poor fuel economy.
