How many gallons of coolant does a 6.4 powerstroke hold?
The 6.4L Powerstroke diesel engine, commonly found in Ford Super Duty trucks, holds approximately 15 gallons of coolant in its cooling system.
Detailed Explanation
The 6.4L Powerstroke is a powerful turbocharged diesel engine produced by Ford for their heavy-duty pickup trucks, such as the F-250, F-350, and F-450 Super Duty models. This engine requires a significant amount of coolant to maintain proper operating temperatures and prevent overheating.
According to the official Ford service information, the total cooling system capacity for a 6.4L Powerstroke engine is 15 gallons (56.8 liters). This includes the radiator, hoses, water pump, and engine block.
Coolant Maintenance
It's important to regularly check the coolant level in a 6.4L Powerstroke and top it up as needed. The cooling system should be flushed and refilled with fresh coolant at the recommended service intervals, typically every 30,000 miles or 2 years.
Using the proper coolant type is also crucial. Ford specifies the use of a high-quality, extended-life coolant that meets the Ford specification WSS-M97B44-D. Mixing different coolant types can lead to compatibility issues and potential damage to the engine.
Consequences of Low Coolant
- Overheating and potential engine damage
- Reduced fuel efficiency
- Decreased engine performance
- Increased emissions
Regularly maintaining the coolant level and condition is essential for the long-term reliability and performance of a 6.4L Powerstroke engine.
What is the life expectancy of a 6.4 diesel?
200,000 miles
With diligent maintenance and attention to known issues, the 6.4 Powerstroke engine can provide reliable performance and longevity, reaching well over 200,000 miles in many cases.
How many gallons of coolant does a 6.4 hold?
I am aware that the stock capacity of the 6.4 is around 7.9 gallons. I was doing an EGR delete on my truck and I decided that I was also going to flush my coolant to switch over to ELC.
How many gallons of coolant do I need?
Let's consider an example: If the cooling system capacity of a vehicle is 12 gallons and the manufacturer recommends a 50/50 mix, you would need 6 gallons of antifreeze to fill the radiator. In this case, you would mix 3 gallons of antifreeze with 3 gallons of distilled water.
What coolant does a 6.4 powerstroke take?
(946 mL) of Supplemental Coolant Additive Motorcraft VC-8 or equivalent.
How many quarts does a 6.4 take?
15 quarts
15 quarts (with filter). After refill check oil level.
What are 6.4 Powerstrokes known for?
Powerhouse Performance: The 6.4 Powerstroke engine is known for its impressive speed and power. It's hailed as the fastest diesel engine of its time, delivering thrilling acceleration and strong performance.
How much coolant does a F250 diesel take?
Coolant: 29.4-30.3 quarts for the 2011-2016 models and 31.7 -35.1 quarts for 2017-2020.
Can you run green antifreeze in a diesel?
The “inorganic” terminology will be clearer shortly. This product is, of course, the familiar “green” coolant. Good stuff. And still perfectly fine for many engine applications, including current small diesels as well as many legacy products still in service.
How many gallons does a 6.4 Powerstroke take?
Only long bed 6.4L have the 38 gallon tank.
How much HP does a stock 6.4 make?
How Much Horsepower Does a 6.4 Powerstroke Have? Out of the box, the 6.4 Powerstroke was rated for 350 horsepower, but it's possible to get as much as 500 horsepower or more by replacing stock parts with 6.4 diesel performance parts. The successor to the 6.4 Powerstroke was the 6.7, rated for 390 horsepower.
