Loading

How many labor hours to replace engine mounts?

Replacing engine mounts typically requires 2-4 hours of labor, depending on the specific vehicle and the complexity of the job. Engine mounts are responsible for securely holding the engine in place and absorbing vibrations, so replacing them is an important maintenance task.


Factors Affecting Engine Mount Replacement Time


The time it takes to replace engine mounts can vary based on several factors:



  • Vehicle Model: Some vehicles have more accessible engine mounts that are quicker to replace, while others may require more disassembly and specialized tools.

  • Number of Mounts: Most vehicles have 2-4 engine mounts that need to be replaced, which affects the overall labor time.

  • Accessibility: The location and accessibility of the engine mounts can make the job easier or more difficult. Mounts that are easily accessible will take less time to replace.

  • Mechanic Experience: An experienced mechanic will be able to complete the job more efficiently than a novice.


In general, you can expect the labor time to be on the lower end of the 2-4 hour range if the engine mounts are easily accessible and the job is straightforward. More complex vehicles or difficult-to-reach mounts may require the full 4 hours or more.


Steps to Replace Engine Mounts


Replacing engine mounts typically involves the following steps:



  1. Raise and secure the vehicle on jack stands or a lift.

  2. Locate and disconnect the engine mounts, which may require removing other components like the engine cover or splash shield.

  3. Unbolt the old engine mounts and remove them from the vehicle.

  4. Install the new engine mounts, ensuring they are properly aligned and tightened.

  5. Reconnect any components that were removed and lower the vehicle.

  6. Test drive the vehicle to ensure the new engine mounts are functioning properly.


Following these steps carefully and taking the necessary precautions is important to ensure the job is done safely and effectively.

Can I drive with bad engine mounts?


If an engine mount breaks off from an engine, there will no longer be effective support. Damaged components can create a safety hazard for yourself and other motorists if other components break or fly off due to engine mount wear.



Is it OK to drive with bad motor mounts?


While you may not have to pull over right away and call a tow truck, you should address a bad motor mount as soon as possible. The longer you drive with bad motor mounts, the more they will deteriorate. If left unchecked, bad motor mounts can fail completely, further damaging the engine and driveline.



What is the replacement period for engine mounts?


As a general rule, your engine mount has been made to last a very long time. But they can wear down and may need to be replaced every 5-7 years. Having them checked will give you a good guide for when they need to get replaced.



How much does labor cost to replace engine mounts?


The average cost for an Engine Mount Replacement is between $504 and $561. Labor costs are estimated between $213 and $269 while parts are priced between $291 and $292. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.



How much does it cost to replace a motor mount on a 2007 Toyota Camry?


Labor costs are estimated between $132 and $166 while parts are priced between $401 and $403.



Should all engine mounts be replaced at the same time?


In principle, yes you can. However, when a mount starts to fail it puts more load on the others. Since they're the same age as the failed mount and are now working harder, they're likely to fail soon too. So while the car is in the air and the engine supported, it probably makes sense to replace them all.



Should I replace all engine mounts at once?


While you don't necessarily need to change all engine mounts at once, if you don't replace them all, you should pay closer attention to them, as they're likely to be the same age as the part you're replacing.



How many hours does it take to replace motor mounts?


In some cases, a professional mechanic might be able to replace some mounts in about one hour, while in many other instances, a mount replacement can take several hours and even an entire workday.



Is replacing engine mounts a big job?


It's not too bad a job to change the motor mounts, but depends on your skill level. It's likely going to require some strength to bust some of those bolts loose and you will need at least a decent jack and a couple jack stands and some chocks as well as whatever tools you need to get the old ones off.



At what mileage do engine mounts go bad?


They last anywhere from 5 to 7 years depending on your car and driving habits. Over the years and thousands of miles, these engine mounts are likely to wear out.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.