How many liters of ATF for Toyota Hiace?
In general, most Toyota Hiace automatic transmissions require about 9 to 12 liters of ATF for a full fill, with around 4 to 6 liters typically exchanged in a standard drain-and-fill service. Exact figures depend on the generation and the specific transmission model, so consult your owner’s manual or a Toyota service bulletin for your VIN.
Understanding the variability across generations
The Toyota Hiace has evolved through multiple generations, each sometimes pairing different automatic transmissions with varying fluid capacities. Older Hiace models used smaller units with less pan capacity, while newer generations often employ more robust four- or five-speed automatics. Because ATF capacity is defined by the transmission model rather than the vehicle alone, precise figures come from the transmission code printed on the transaxle or in the service documentation.
Common ATF capacity ranges by transmission type
Below are typical total capacities and drain-and-fill amounts for common Hiace automatic transmissions. These figures are general guidance and can vary by market and exact transmission model.
- Full-system (total) ATF capacity: about 9 to 12 liters for most 4- and 5-speed automatics used in Hiace generations from the 1990s to present. In some larger or newer units, capacity can approach 12 to 14 liters, though that is less common in standard Hiace configurations.
- Drain-and-fill (pan drain) volume: about 4 to 6 liters typically removed and replaced in a standard service. This is the portion you actually drain when performing a pan-only change.
- During a complete flush with a dedicated machine (including the torque converter): roughly 9 to 12 liters or more might be circulated to replace all ATF.
Note: These are approximate figures. The exact capacity depends on the specific transmission model, whether the torque converter is included in the fill, and whether the system has been modified. Always consult the owner's manual, a Toyota dealership, or a qualified mechanic for the precise quantity for your Hiace's VIN and transmission code.
Practical guidance for maintenance planning
If you’re planning a service, here’s a practical approach to avoid overfilling or underfilling:
- Identify your transmission type from the owner's manual or under-hood label. The Hiace's transmission code can be found on the dipstick or side of the transmission.
- Check the ATF specification required (e.g., Toyota ATF WS or other specified fluid) and use the correct fluid type.
- For a routine drain-and-fill, plan to replace about 4–6 liters, which is the typical amount drained from the pan.
- For a full flush, ensure you have enough fluid to add up to roughly 9–12 liters, and monitor the level via the transmission dipstick to the correct hot/cold range per spec.
When in doubt, have a professional perform the service to avoid transmission damage and ensure correct level and fluid type, especially in Hiace models with torque converters or more complex transmission assemblies.
What the owner’s manual says
Your specific Hiace model and year will have a precise ATF capacity specification. Manuals typically list total ATF capacity for a full fill and the amount to drain for a pan-only change. If you don’t have the manual, contact a Toyota dealer or consult VIN-specific service documentation for exact figures.
Summary
For most Toyota Hiace automatic transmissions, plan for a total ATF capacity of about 9–12 liters, with 4–6 liters replaced in a standard drain-and-fill. More thorough maintenance (including a complete flush) can approach the upper end of that range. Always verify with the exact transmission code for your vehicle and follow the official guidance to ensure proper fluid type and level.
How much transmission fluid does a Toyota take?
So we'll start with about three quarts. Probably. And probably have to put a little bit more in there but either way I like to have enough to get going. So like I told you guys. Before.
How much oil does a Toyota Hiace take?
2025 Toyota Hiace Oil Capacity Chart
| Model Year | Engine Type | Oil Capacity (Liters) |
|---|---|---|
| 2016-2020 | 2.5L 2KD-FTV | 5.7L |
| 2021-2025 | 2.8L 1GD-FTV | 6.1L |
How many liters does a Toyota Hiace take?
Technical Specifications
| ENGINE | |
|---|---|
| Displacement (cc) | 2986 |
| Additional fuel tank capacity (L) | |
| Curb weight (kg) | 1885 |
| Fuel tank capacity (L) | 70 |
How many litres of ATF does a Toyota Hiace take?
| System | Capacity (l) | Type |
|---|---|---|
| Automatic transmission | ||
| 4AT 2004- | 2.7 (repl.) | Toyota ATF Type T-IV |
| 4AT 2011- | 8.0 (full) | Toyota ATF Type T-IV |
| 6AT | 7.9 | Toyota ATF WS |
