How many liters of oil does a Lexus CT 200h take?
About 4.2 liters (roughly 4.4 US quarts) of engine oil are required for a standard oil change with the filter on the CT 200h's 1.8-liter hybrid engine.
Exact capacity and what it covers
The official capacity is the total amount needed to fill the engine lubrication system when performing a full drain and filter replacement. This figure is commonly cited for CT 200h models across markets.
Before listing the capacity figures, here is a quick note to help you interpret the numbers and plan your service.
- Engine oil capacity with filter: 4.2 L (4.4 qt) for most CT 200h models using the 1.8 L (2ZR-FXE) hybrid engine.
- Oil capacity without filter: approximately 4.0 L, depending on how much drain occurs and the specific engine version.
- Recommended oil type: Synthetic 0W-20 is standard in many markets; 5W-20 may be listed in some regions or climates. Always confirm in the owner's manual or with a Lexus service adviser.
In practice, performing a full oil change with a new filter typically fills to about 4.2 liters. If you do not replace the filter, you may drain around 4.0 liters. Always verify the level with the dipstick after filling and adjust to the correct mark.
Market and year variations
While the CT 200h used the same 1.8-liter engine across most production years, service manuals can show minor variations by market. Use your specific owner's manual for the exact capacity and grade recommendations for your region and model year.
Summary
In short, the Lexus CT 200h typically requires about 4.2 liters of engine oil for a standard oil change including the filter, roughly 4.4 US quarts. Always check your manual for your exact year and market, and use the recommended synthetic oil grade (commonly 0W-20).
