How many litres of oil does a 2013 Ford Focus take?
Approximately 4.3–4.5 litres with the oil filter for the common 2.0-litre gasoline engine; other engines in the lineup vary slightly, so check your specific model’s manual for the exact figure.
Engine options and their oil capacity
The 2013 Ford Focus was offered with several engines depending on market. Oil capacity depends on the engine variant and whether the oil filter is replaced. Here are typical figures by engine type.
2.0L Duratec I-4 (gasoline)
Oil capacity: about 4.3–4.5 litres with the filter installed. The recommended oil grade is typically 5W-20, but verify the exact specification for your VIN.
1.6L Ti-VCT (gasoline)
Oil capacity: about 3.8–4.0 litres with the filter installed.
Diesel engines (Europe)
Oil capacity: roughly 4.3–4.8 litres depending on displacement (for example 1.6L TDCi or 2.0L TDCi) and whether the filter is replaced.
How to confirm the exact capacity for your car
To confirm your specific oil capacity in litres, consult authoritative sources for your VIN and market.
- Check the owner's manual for the exact figure, including the filter, as capacities can differ by trim and region.
- Look at the under-hood data plate or service label for capacity notes relevant to your vehicle.
- Ask an authorized Ford dealer or use Ford's official service data for your vehicle; the exact figure can vary by market and configuration.
With the precise specification in hand, perform the oil change using the correct quantity and the recommended oil grade.
Summary
In summary, the 2013 Ford Focus typically takes around 4.3–4.5 litres of engine oil with the filter for the common 2.0L gasoline variant; other engines in the lineup can differ by a fraction of a litre. Always verify the exact figure in the owner’s manual or Ford service data for your specific car and market.
How much oil does a 2.0 4 cylinder engine take?
Approximately 5.1 quarts
2.0L turbocharged engine: Approximately 5.1 quarts of oil.
How much oil does a 3.8 L V6 take?
A 3.8L V6 engine typically takes between 4.5 and 6 quarts of oil, depending on the specific vehicle and year. For example, a 1994-2004 Ford Mustang with a 3.8L V6 needs about 5 quarts, while a 2007-2011 Jeep Wrangler with a 3.8L V6 takes about 6 quarts. Always check your vehicle's owner's manual or consult a reliable source, like an oil capacity chart, to confirm the exact amount for your specific model, and always check the oil level with the dipstick after refilling.
Here are some examples of oil capacities for different vehicles with a 3.8L V6 engine:
- Ford Mustang (1994-2004): ~5 quarts
- Jeep Wrangler (2007-2011): ~6 quarts
- Pontiac Grand Prix (2008, 3800 V6): ~4.5 quarts
- Buick LeSabre (2000): ~7.4 quarts
How much oil does my 2013 Ford Focus take?
The 2013 Ford Focus engine oil capacity depends on the engine type: the standard 2.0L engine is 4.5 quarts (4.3 liters) with a filter change, while the 2.0L EcoBoost requires 5.5 quarts (5.2 liters) with a filter change. Always check the owner's manual or the vehicle's dipstick to confirm the correct amount for your specific engine.
Engine oil capacities
- 2.0L (standard): 4.5 quarts (4.3 liters) with filter change.
- 2.0L EcoBoost: 5.5 quarts (5.2 liters) with filter change.
- 1.0L EcoBoost: Approximately 5 liters (around 5.3 quarts).
- 1.6L TDCi Diesel: Approximately 4.25 liters (around 4.5 quarts).
Important considerations
- Always check the dipstick: After adding oil, run the engine for a minute, then check the dipstick to ensure the level is within the recommended range. You may need to add a small amount of additional oil to reach the correct fill level.
- Consult the manual: For the most accurate and specific information for your vehicle, consult the owner's manual or the label under the hood, which will provide the exact capacity, recommended oil viscosity, and oil specification.
How many quarts of oil does a Ford Focus 2.0 liter engine require?
A Ford Focus with a 2.0L engine requires 4.5 quarts of oil (including the filter) and uses 5W-20 viscosity oil. Be sure to check your owner's manual to confirm the specific capacity for your model year, as the ST version with a turbocharger requires more oil and a different viscosity.
- Capacity: 4.5 quarts (with filter) for the standard 2.0L engine.
- Viscosity: 5W-20.
- Recommendation: After adding the new oil, start the engine, let it run for a couple of minutes, then shut it off and wait a few minutes before checking the dipstick to ensure the correct level.
- Turbocharged 2.0L (ST): This model requires a higher capacity, typically around 5.7 quarts, and uses a different oil viscosity, such as 5W-30. Always consult your manual or the oil cap for the exact specifications for your specific vehicle.
