Why wont my Subaru tailgate open three beeps?
If your Subaru's tailgate won't open and you hear three beeps, it's likely due to a safety feature that prevents the tailgate from opening when the vehicle is in motion. This is a common issue that can be easily resolved by following a few simple steps.
Understanding the Three Beeps
The three beeps you hear when trying to open the tailgate are a warning signal from your Subaru's electronic control unit (ECU). This signal is triggered when the vehicle's speed sensor detects that the car is in motion, indicating that it's unsafe to open the tailgate.
The purpose of this safety feature is to prevent the tailgate from opening unexpectedly while the vehicle is moving, which could lead to serious injury or damage. It's a common feature in many modern vehicles, including Subarus, to prioritize the safety of the driver and passengers.
Resolving the Issue
To open the tailgate when you hear the three beeps, you'll need to follow these steps:
- Bring your Subaru to a complete stop in a safe location.
- Engage the parking brake to ensure the vehicle remains stationary.
- Try opening the tailgate again. The three-beep warning should no longer be active, and the tailgate should open without issue.
If the tailgate still won't open after following these steps, there may be a more complex issue with the vehicle's electrical system or the tailgate mechanism itself. In this case, it's best to consult a Subaru-certified mechanic for further diagnosis and repair.
Preventive Measures
To avoid the three-beep warning in the future, it's important to always come to a complete stop before attempting to open the tailgate. Avoid opening the tailgate while the vehicle is in motion, as this can trigger the safety feature and prevent the tailgate from opening.
Additionally, be mindful of the vehicle's speed sensor and ensure that it's functioning correctly. If the speed sensor is malfunctioning, it may trigger the three-beep warning even when the vehicle is stationary, which could indicate a larger issue that requires professional attention.
How to reset Subaru trunk memory?
It. Until we get some audibles. And the lights are going to flash so that is now our memory. Position so I just closed. It.
How to reset Subaru Ascent Liftgate?
You hear the beep. And now we're set to that position. So I'm going to demonstrate here I'm going to go ahead and close. It. Simple One Touch reopen. And it stops at a predetermined height.
How do I get my Subaru to stop beeping?
Now press and hold one two three four five six open and close. And no more beep to turn the beeps back on you just reverse the process. And do it again.
Why is my trunk not unlocking?
One of the first things you can do if your trunk won't open is to try it again. In this scenario, the trunk latch may have gotten stuck due to dirt and debris getting stuck on it or from the trunk rubber sticking to the lid itself. This will require more force to open making you think that the lid is stuck.
How do I reset my automatic liftgate?
Resetting the power tailgate
- With the vehicle in OFF or ON position, shift to P (Park, Automatic transmission) or N (Neutral, Manual transmission).
- Press the power tailgate open/close button inside the tailgate and the power tailgate open/close button outside the vehicle simultaneously until a chime sounds.
How to fix a Subaru trunk that won't open?
Hold the rear gate button for 10 seconds (the one on the rear gate itself), then slowly manually open the rear gate yourself all the way until it beeps. Then slowly manually close it all the way until it latches.
How do you reset the tailgate on a Subaru?
How to reset your Subaru rear hatch. When this issue is occurring, the car will beep three times each time you press the rear gate button. The natural response is to release the button once the car beeps. To reset the rear door, keep holding the rear hatch release button until you hear a soft “thuck”.
Why is my automatic liftgate not working?
If your liftgate isn't operating, check the power supply. Ensure the vehicle battery is charged and that the liftgate's power switch is turned on. Look for any blown fuses or tripped circuit breakers. A liftgate that moves slowly could be due to low hydraulic fluid levels or a weak battery.
Why won't my Subaru open the trunk beeps three times?
Three beeps means that the remote system has malfunctioned and needs to be reset. Hold down the outside buttons for about thirty seconds and the tailgate will release. You may have to manually open the tailgate to its fully open position. Next use the ``Close'' button in the tailgate to close the rear hatch.
Why is my Subaru beeping when I try to open the trunk?
OK that beeping noise from the rear is telling you that the rear hatch is not closed and is the most likely cause of what killed the battery . What happens is the latch itself is bad or the closer motor so once that battery is charged you need to have these checked or it will happen again.
