How many litres of oil does a Ford Ranger hold?
Oil capacity for a Ford Ranger varies by engine and generation; most modern Rangers use roughly 5.5 to 7.5 litres of engine oil, with exact figures differing by engine code and market. Always verify the precise specification for your vehicle.
Engine options and their typical oil capacities
The following figures are approximate and include the engine oil filter. They can vary by model year, market, and whether a filter is changed.
Petrol engines
Petrol powertrains in the Ranger typically require a mid-range oil quantity, with variations by displacement and turbo configuration.
- 2.3L EcoBoost and similar four-cylinder petrol engines: about 5.5–6.0 litres.
Note: Exact capacity should be confirmed for your specific model year and engine code.
Diesel engines
Diesel variants generally need more oil due to larger displacement and engine design.
- 2.0L EcoBlue diesel: around 6.0–6.5 litres.
- 3.2L Duratorq TDCi diesel: roughly 6.5–7.5 litres.
Capacities can differ by market and generation; always refer to official specs for your vehicle.
How to find the exact capacity for your Ranger
To determine the precise oil capacity for your specific Ranger, use these steps:
- Check the owner's manual or Ford’s official service data for your exact year and engine code.
- Look for an engine bay label or under-hood sticker listing oil capacity and grade.
- Consult Ford’s online spec sheets or inquire at a dealership with your VIN for a definitive figure.
Knowing the exact capacity helps you avoid underfill or overfill during maintenance.
Summary
The Ford Ranger’s oil capacity is not a single value; it ranges roughly from 5.5 to 7.5 litres depending on the engine and market. For precise figures, reference the specific engine code and model year in the manual or a Ford service source.
How many quarts does a 2.3 Ford Ranger take?
Capacities and Specifications - 2.3L EcoBoost
| Item | Capacity |
|---|---|
| Engine oil (with oil filter) | 5.7 qt (5.4 L) |
| Engine coolant | 11.6 qt (11 L) |
| Brake fluid | Between MIN/MAX on brake fluid reservoir |
| Rear axle fluid | 2.4 pt (1.15 L) |
How much oil does a 2019 Ford Ranger 2.3 L take?
The oil capacity for a 2019 Ford Ranger with a 2.3L engine is 6.2 quarts (5.9 liters) with a filter change. Some sources, like the owner's manual for later model years, may list a slightly different capacity, but 6.2 quarts is the most consistently cited amount for the 2019 model.
- Capacity: 6.2 quarts (5.9 liters) with oil filter change
- Oil Viscosity: 5W-30 is recommended for most conditions
- Important: Always check the dipstick after filling and adjust as needed to ensure the correct level.
How many liters of engine oil for Ford Ranger?
Summary: Ford Ranger / Ford Everest / Mazda BT-50 (3.2-litre engine): 9.7 litres.
What kind of oil does a 3.2 Ford Ranger take?
Engine oil - Diesel (for markets with low sulphur content less than 350 ppm): If you are unable to find an oil that meets the specification, you must use SAE 5W-30 that meets the specification defined by ACEA A5/B5.
