How much oil does a 2.5 Ford Transit Connect take?
The Transit Connect with the 2.5-liter Duratec engine generally requires about 4.5 quarts (4.3 liters) of engine oil when you include the replacement filter. Always verify the exact figure for your year and model in the owner's manual or a Ford service guide.
Oil capacity for the 2.5L Duratec engine
Understanding the standard capacity helps with planning oil changes and ensuring you have the right quantity on hand.
Typical capacity
Below is the standard capacity you can expect for the 2.5L Duratec used in the Transit Connect. The figure refers to a full drain and refill including the filter.
- 4.5 quarts (4.3 liters) of engine oil with the oil filter.
Note: Exact capacity can vary slightly by model year, engine specifications, and whether a larger or different filter is used. Always confirm with the official manual or dealer data for your specific vehicle.
Maintaining the oil: changing and level checks
If you're performing an oil change yourself, these steps outline the general process and how to verify the level after refill.
- Warm the engine to operating temperature, then park on a level surface and turn off the engine. Gather your oil, new filter, tools, and a drain pan.
- Lift the vehicle safely (if needed) and place a drain pan beneath the oil pan. Remove the drain plug and allow the old oil to completely drain out.
- Remove and replace the oil filter. Coat the new filter gasket with a light layer of oil to ensure a proper seal, then install by hand until snug and give it a final gentle turn as specified by the filter manufacturer.
- Install a new drain plug gasket if needed, then refill the engine with the recommended oil quantity (about 4.5 quarts, plus or minus a little for your filter). Use the correct grade as specified in the manual (commonly 5W-20 for many Ford engines).
- After adding oil, replace the oil cap, start the engine and let it run briefly. Check for leaks, then turn off and wait a few minutes before checking the dipstick. Top up to the correct level if necessary.
Carrying the right quantity and checking the level ensures proper lubrication and helps avoid overfill or underfill issues.
Summary
For most Ford Transit Connect models with the 2.5-liter Duratec engine, plan on about 4.5 quarts (4.3 liters) of oil with the filter. Always confirm the exact capacity for your year and trim in the owner's manual, and use the oil grade recommended by Ford (typically 5W-20). Regular checks after a change help ensure the engine stays properly lubricated.
