How many miles per gallon does a 1976 Chevy truck get?
Most 1976 Chevy pickups typically delivered between 12 and 18 miles per gallon, with six-cylinder models tending toward the higher end and V8-powered trucks toward the lower end depending on gearing, load, and driving conditions.
Context: The 1976 Chevy C/K lineup
The 1976 Chevy C/K series offered a range of engines and drivetrains, including 2WD and 4WD configurations, manual and automatic transmissions, and multiple engine options from a six-cylinder to big-block V8s. Fuel economy varied widely because of these choices, plus factors like axle ratio, tire size, and overall vehicle condition. Below is a snapshot of typical figures you might encounter based on era EPA estimates and common owner experiences.
Common configurations and their mpg ranges
The following list outlines typical engine/drivetrain setups and the corresponding mpg ranges you might expect. Real-world numbers depend on maintenance, payload, terrain, and driving style.
- 250 cu in inline-6 engine, 2WD, manual transmission: City 12–15 mpg; Highway 18–22 mpg; Combined roughly 15–18 mpg.
- 350 cu in V8, 2WD, manual transmission: City 12–15 mpg; Highway 18–20 mpg; Combined around 15–17 mpg.
- 350 cu in V8, 2WD, automatic transmission: City 11–14 mpg; Highway 17–19 mpg; Combined around 14–16 mpg.
- 400 cu in V8 (big-block), 2WD, automatic transmission: City 11–13 mpg; Highway 15–18 mpg; Combined roughly 13–15 mpg.
- 4WD configurations (any engine), typically 2–4 mpg lower in highway driving and more in city driving depending on terrain and gearing.
Note: These ranges reflect EPA-era estimates supplemented by common owner reports. Actual mileage varies with gearing, axle ratio, load, maintenance, and driving conditions.
Bottom line: What to plan for
For planning purposes, a typical 1976 Chevy truck can be expected to achieve mid-teens in combined driving, with higher efficiency on light loads and highway cruising when equipped with a six-cylinder engine and favorable gearing. V8-powered rigs, especially with automatic transmissions or 4WD, generally sit toward the lower end of that range. Always consider condition and configuration when estimating fuel economy for a specific truck.
Summary
Fuel economy for a 1976 Chevy truck is highly configuration-dependent. Expect roughly 12–18 mpg overall, with six-cylinder, lighter-duty rigs tending toward the upper portion of that range and V8-equipped trucks toward the lower portion. In real-world use, about 14–17 mpg combined is a reasonable benchmark for planning, while highway-only figures may climb into the upper teens for certain setups.
How many miles per gallon does a 1976 300D get?
The 1976 Mercedes-Benz 300D typically gets around 20.5 mpg in the city and 30.1 mpg on the highway, with a combined average of approximately 22.8 mpg. Factors like driving habits, maintenance, and transmission type can influence the actual mileage.
- Combined: Around 22.822.822.8 mpg
- City: Approximately 20.520.520.5 mpg
- Highway: Approximately 30.130.130.1 mpg
- Note: These figures are from the manufacturer's specifications. Real-world performance can vary.
What is the gas mileage on a 1974 Chevy C10?
It should get 10-12 mpg.
What is a 1976 Chevy truck worth?
The value of a 1976 Chevy truck ranges significantly, but an average C10 in good condition is valued around $15,038, while prices can go from under $10,000 for project trucks to over $90,000 for rare, pristine examples. Prices depend heavily on condition, mileage, engine, and any modifications.
Factors that influence value
- Condition: A truck in excellent, original condition will be worth much more than one needing extensive repairs.
- Mileage: Lower mileage generally leads to a higher valuation.
- Engine and drivetrain: The type of engine and transmission can affect the price.
- Trim and options: Higher trim levels like "Silverado" and specific factory options can increase value.
- History: A well-documented history, including maintenance records, can improve the worth of the truck.
- Modifications: While some modifications can be desirable, they can also decrease the value if they were not done professionally or don't align with current market trends.
Price examples
- Average: A 1976 Chevrolet C10 1/2 Ton in good condition is valued at approximately $15,038.
- High-end: Exceptionally well-maintained and rare examples have sold for over $90,000 at auction.
- Low-end: Trucks in poor condition with significant needs may sell for as low as $8,250.
Where to find current listings
- Classic.com: Provides an overview of the market for specific models.
- Hagerty: Offers detailed valuation tools based on condition and model.
- Classics on Autotrader: Features a wide variety of classic cars and trucks for sale.
- eBay: A large marketplace with many listings, though you'll need to carefully evaluate each one.
How many miles per gallon does a 1976 cb550 get?
The engine output was 50 bhp (37 kW) at 8,000 rpm and 26.04 lbf⋅ft (35.31 N⋅m) torque at 7,500 rpm, with a curb weight of 455 lb (206 kg) and average fuel consumption of 5.9 L/100 km; 48 mpg‑imp (40 mpg‑US).
