Loading

How many quarts does a 2013 Lexus RX350 take?

Approximately 6.4 quarts of engine oil are required for a full oil change on the 2013 Lexus RX350, including the new filter.


The RX350 uses a 3.5-liter V6 engine, and its official engine oil capacity is 6.4 quarts with the filter installed. It typically relies on synthetic oil, commonly 0W-20, and owners should confirm the exact specification from the vehicle’s manual or under-hood label for their trim and climate.


Engine oil capacity and maintenance specifics


Here are the essential figures and guidance for performing an oil change on this model.



  • Engine oil capacity: 6.4 quarts (with filter) for the 3.5L V6 RX350 (2013).


Pro tip: Always replace the oil filter, use the recommended 0W-20 synthetic oil, and re-check the level after the engine runs and settles.


Oil viscosity and level checking


Lexus generally recommends 0W-20 full synthetic oil for the 2013 RX350. If you cannot obtain 0W-20, consult the owner’s manual for approved alternatives and local climate considerations. After pouring in the oil, run the engine briefly, turn it off, wait a few minutes for it to settle, and re-check the dipstick to ensure the oil reaches the full mark.


Summary


For a 2013 Lexus RX350, plan on about 6.4 quarts of engine oil with a new filter for an oil change, using the manufacturer-recommended synthetic viscosity (typically 0W-20). Always verify exact specifications in the owner’s manual or service plate and follow proper oil-change procedures to ensure accurate levels and engine longevity.

How many quarts of oil does a 3.6 L V6 take?


The oil capacity for a 3.6L V6 engine varies by vehicle, but it is often around 5 to 6 quarts with a filter change. It is best to check your specific vehicle's owner's manual for the exact capacity, as it can differ between makes and models, with some requiring 5 quarts and others needing 5.9 or 6 quarts. 

  • Typical capacity: Many 3.6L V6 engines require approximately 5 to 5.9 quarts of oil for a full oil and filter change. 
  • Specific examples:
    • Some Jeep and Dodge models with the 3.6L Pentastar engine use 5 quarts. 
    • Other models, such as the 2021 Jeep Grand Cherokee and certain 2024 Ram 1500 Classic models, use around 5.9 quarts. 
    • The 2023 Volkswagen Atlas 3.6L V6 requires 5.8 quarts. 
    • The 2016-to-current Jeep Grand Cherokee and Dodge Durango with the 3.6L Upgrade engine have a capacity of 6 quarts. 
  • Important note: Always consult your vehicle's owner's manual to confirm the exact oil capacity and viscosity recommendation for your specific car. After refilling, it's crucial to check the oil level before driving to ensure it is at the correct level. 



How much is an oil change for a 2013 Lexus RX 350?


$155 - $183. “Independent” refers to a service center that services multiple makes instead of specializing.



How much oil does a 3.0 V6 take?


A 3.0L V6 engine typically requires between 4.5 and 6 quarts of oil, depending on the specific vehicle model and year. For example, a 2006 Ford Ranger 3.0L V6 takes 4.5 quarts, while a 2012 Ford Escape 3.0L V6 takes 6 quarts. To be certain, always check your vehicle's owner's manual for the exact capacity. 
Examples of 3.0L V6 oil capacity

  • 2006 Ford Ranger: 4.5 quarts with a filter 
  • 2002 Ford Escape: 5.5 quarts with a filter 
  • 2012 Ford Escape: 6 quarts with a filter 
  • Other models: Check your owner's manual for the specific amount. Some sources suggest 6 quarts is common for many models, but this can vary. 



How many quarts of oil does a 2013 Lexus RX350 take?


Oil Grade: API*

Viscosity:0W-20 (All TEMPS) - 0W-20 is the best choice for good fuel economy and starting in cold weather. If 0W-20 is not available 5W-20 may be used. However, it must be replaced with 0W-20 at the next oil change.
Capacity:6.4 quarts (with filter). After refill check oil level.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.