How many quarts does a 5.7 Dodge Charger take?
Typically, a 5.7-liter Hemi V8 in a Dodge Charger requires about 7 quarts of engine oil for a standard drain-and-fill with a new filter.
Exact capacity can vary slightly by model year and configuration. The official spec commonly lists around 7 quarts (about 6.6 liters) with the oil filter in place, while some references note a range that can hover around 6–7 quarts depending on whether the filter is changed. Always verify with the owner's manual or service manual for your specific year, and confirm the level with the dipstick after filling.
Official capacity and common variations
Most 5.7L Hemi Chargers follow a standard oil-fill of roughly 7 quarts when the filter is replaced. There can be minor variations by year or engine code, especially if a different filter size is used or if the oil is measured without the filter installed.
Here are the typical oil capacity figures you may encounter when servicing a 5.7L Hemi in a Charger.
- Oil capacity with filter: about 7 quarts (roughly 6.6 L).
- Oil capacity without the filter: about 6 quarts.
- Year-to-year variation: most 5.7L Chargers adhere to the 7-quart spec, but verify for your exact year and engine code.
Bottom line: plan on about 7 quarts with the filter installed, but confirm with your year’s manual and use the dipstick to ensure the correct level.
How to confirm the exact capacity for your car
Because the 5.7L Hemi appears in Chargers across multiple model years, the precise capacity can differ slightly. Check the official sources for your specific year and engine code, and always verify the final level with the dipstick after adding oil.
Oil grade and quantity considerations
While focusing on quantity, also use the recommended oil grade for your climate and driving conditions, and replace the filter at every change. After filling, run the engine, wait a few minutes, and recheck the level to ensure accuracy.
Summary
In short, the typical oil capacity for a 5.7 Dodge Charger is about 7 quarts with a new filter. Always confirm for your exact year and configuration, and verify the level with the dipstick after filling.
What oil does a 5.7 V8 Hemi take?
SAE 5W-20
Use the SAE 5W-20 full synthetic oil if your truck has the 5.7L V8 HEMI gasoline engine.
How many quarts does a 5.7 L V8 take?
2007-2009 Toyota Tundra 5.7L V8 oil change fill capacity is 7.0 liters (7.4 quarts).
How many liters of oil does a 5.7 liter Hemi Challenger hold?
7 liters
7 liters 5W-20 Dodge Challenger engine oil and oil filter for 5.7L 16V V8 Hemi models.
How much oil does a 5.7 Dodge Charger take?
7 Liters Of Full Synthetic German RAVENOL SFE 5w20 Motor Oil - Meets Chrysler MS-6395 oil specification and viscosity required for the 5.7L V8 Hemi gasoline engine.
