How many quarts of oil 6.7 powerstroke 2024?
The 2024 6.7L Power Stroke diesel requires about 15 quarts of engine oil when performing a full drain and fill with a new filter.
In this article we outline the official capacity, how it applies to routine maintenance, and practical guidance for planning and executing an oil change on Ford’s 6.7L Power Stroke. This engine powers Ford’s heavy‑duty Super Duty lineup, and keeping it properly lubricated is essential for durability under towing and demanding use. Always verify the exact capacity and oil specification in your owner’s manual or Ford’s official service information for your specific configuration.
Official oil capacity for the 2024 6.7 Power Stroke
Ford lists the engine oil capacity as 15 quarts (14.2 liters) with the filter installed, which is the standard amount needed when performing a complete drain and filter change on a 2024 6.7L Power Stroke.
Maintenance notes and practical considerations
Use the recommended oil grade and follow Ford’s maintenance intervals, which vary with driving conditions, towing, and ambient temperature. For this engine, synthetic 5W-40 oil that meets the appropriate API and Ford specifications is commonly advised. Ensure you have the correct filter for your configuration and always verify the oil level with the dipstick after a change.
To perform an oil change, gather the following items:
- 15 quarts (approximately 14.2 liters) of 5W-40 synthetic engine oil, meeting Ford spec WSS-M2C171-F1 or equivalent
- New oil filter compatible with the 6.7L Power Stroke
- Drain pan, funnel, and rags
- Tools for removing the drain plug and the filter (socket/wrench, etc.)
- Jack stands or ramps, wheel chocks, and appropriate safety gear
Having these items ready ensures a smooth oil-change process and helps maintain proper lubrication.
Step-by-step oil-change procedure
Use this step-by-step guide to perform a full drain-and-fill with a new filter on the 6.7L Power Stroke. Always follow the vehicle’s service manual for any model-specific instructions.
- Warm the engine to operating temperature to help the old oil drain more completely.
- Safely raise the vehicle, secure it on stands or ramps, and place a drain pan beneath the oil pan.
- Remove the drain plug and allow the used oil to drain fully; remove the old oil filter and set it aside.
- Install the new oil filter and any related hardware, then reinstall the drain plug with any required washer.
- Begin pouring in the new oil. Start by adding about 12 quarts, then check the dipstick and add oil in small increments until the level reaches the full mark (approximately 15 quarts total).
- Run the engine for a few minutes, turn it off, and recheck for leaks. Recheck the oil level after a few minutes of rest and top off if necessary.
Following these steps will ensure a complete oil change with the correct oil level and proper lubrication for the 6.7L Power Stroke.
Summary
For the 2024 Ford 6.7L Power Stroke, the official engine oil capacity is 15 quarts with the filter installed. Use a high-quality synthetic 5W-40 oil that meets Ford specifications, and perform a full drain-and-fill with a new filter to achieve the correct level. Always consult the owner’s manual or Ford service information for the exact specification for your vehicle, and dispose of used oil in accordance with local regulations.
