How many quarts of oil are in 5.7 Hemi Durango?
The Durango’s 5.7L Hemi engine typically requires 7 quarts of engine oil for a full change with a new filter.
That figure reflects the official capacity listed for most 5.7L Hemi Durango applications. In practice, you should verify the exact amount for your specific year and configuration in the owner’s manual or with a dealer, and of course always fill to the dipstick’s full mark after a change.
Official capacity for the 5.7 Hemi Durango
The standard engine oil capacity cited for the 5.7L Hemi in Durango models is 7 quarts (6.6 liters) with the filter installed. This is the figure service data and many manufacturers’ specifications use when describing a typical full-change interval.
With filter and full-change considerations
When performing a full oil change and installing a new filter, plan around 7 quarts to reach the proper level on the dipstick. If the filter isn’t replaced, the total may differ slightly, so always verify the level after adding oil.
Practical maintenance notes
Always use the oil viscosity recommended for your model year and climate (commonly 5W-20 or 5W-30 for many 5.7L Hemi Durangos) and follow the maintenance schedule in your owner’s manual. After adding oil, run the engine briefly and recheck the level on the dipstick to ensure you’re within the correct range.
Summary
In short, you should plan for about 7 quarts of engine oil for a standard full oil change on a 5.7 Hemi Durango, with the exact amount verified by the dipstick and the specific year’s manual.
What oil should I run in my 5.7 Hemi?
The 5.7L HEMI engine requires SAE 5W-20 full synthetic oil for model years 2005–2021, and SAE 0W-20 full synthetic oil for model years 2022–2024. It is critical to use the oil type specified in your owner's manual or on the oil fill cap to ensure proper engine performance and protection. Always look for a full synthetic oil that meets the MS-6395 oil quality specification.
Oil type by model year
- 2005–2021: SAE 5W-20 full synthetic oil
- 2022–2024: SAE 0W-20 full synthetic oil
Important considerations
- Use full synthetic: Full synthetic oil is recommended for better engine protection and longer change intervals.
- Check your manual: The owner's manual or the oil fill cap provides the definitive recommendation for your specific vehicle.
- Meet specifications: Ensure the oil meets the FCA Chrysler MS-6395 oil quality specification.
- Oil quantity: The 5.7L HEMI typically requires seven quarts of oil when changing the oil and filter.
- Consider climate: If you have an older model and live in a very hot climate, some suggest SAE 5W-30 full synthetic may offer more protection, but it's best to stick to the manufacturer's recommendation to avoid potential warranty issues.
How much oil does a 5.7 Hemi Durango take?
A Dodge Durango with a 5.7L Hemi engine requires 7 quarts of oil when changing the oil and filter. It's important to fill the new oil filter with oil before installing it and to check the level on the dipstick after the engine has run for a short time to ensure it's correct.
- Capacity: 7 quarts (with filter change).
- Oil type: The recommended viscosity is typically SAE 5W-20, which is often indicated on the engine's oil filler cap.
- Procedure: Add the oil after installing the new filter. Start the engine and let it run for a minute to circulate the oil and fill the filter, then shut it off and check the dipstick to top off if needed.
Does the 5.7 hemi take 7 quarts of oil?
Ram 1500 5.7L Hemi Oil Fill Capacity
2005 - 2024 Ram 1500 oil capacity for the 5.7L Hemi engine is 6.6 liters or 6.9 quarts.
How many quarts of oil does a 2018 Dodge Durango RT use?
A 2018 Dodge Durango takes 7 quarts of oil.
