How many quarts of oil are in a Subaru Tribeca?
Approximately 5 quarts of engine oil are needed for a standard oil change on a Subaru Tribeca, with most engines typically cited in the 4.7–5.5 quart range depending on year and configuration. For precise capacity, always check the owner's manual for your exact model year and setup.
Oil capacity for the Tribeca's EZ30 H6 engine
The Tribeca uses Subaru's EZ30 3.0-liter flat-six engine. The official capacity when changing the oil with the filter installed is about 5.0 quarts (roughly 4.7 liters). Certain manuals and service references note up to about 5.5 quarts for specific year-to-year variations or configurations (such as optional equipment affecting capacity). In practice, many owners start with 5 quarts and verify the level with the dipstick.
Variation by year and configuration means you could see slightly different figures; verify with your manual or Subaru dealer. The following list provides typical references you might encounter when researching or performing maintenance.
- Oil capacity with a new filter for the EZ30 H6 Tribeca engine: about 5.0 quarts (4.7 L).
- Some sources show 5.3–5.5 quarts for certain model years or when factory filters and OEM specifications differ; consult the owner's manual for the exact spec for your car.
- If your Tribeca has an oil cooler or other equipment, the total capacity might differ marginally; always fill using the official specification and check with the dipstick during the process.
The above figures refer to capacity with the filter in place; if you drain the oil and replace the filter, start with roughly the stated capacity and then top off to the correct level. Use the recommended oil grade (often 5W-30 full synthetic for Subarus) and ensure the drain plug torque is correct.
Practical tips for your oil change
To ensure you use the correct amount, follow a standard procedure: drain the oil completely, replace the filter, add oil in increments, and check the level with the dipstick after starting the engine and letting it run for a minute. Recheck and top up if necessary. Keep a small amount of the correct grade oil on hand to account for minor discrepancies.
Summary
In short, plan on about 5 quarts of engine oil for a Tribeca oil change, with slight variations by model year and configuration. Always confirm the exact capacity in the owner's manual or with a Subaru dealer and verify the level with the dipstick after the oil change. Regular maintenance keeps the flat-six engine running smoothly.
