How many quarts of oil does a 2012 Dodge Caliber take?
The 2012 Dodge Caliber takes 4.5 quarts of oil for a standard oil change. This includes the oil filter replacement as well.
Detailed Answer
The 2012 Dodge Caliber is a compact car that was produced by Dodge from 2006 to 2012. When it comes to the oil change requirements for this vehicle, the manufacturer specifies that it takes 4.5 quarts of oil for a standard oil change.
This oil capacity applies to the 2.0-liter and 2.4-liter four-cylinder engines found in the 2012 Dodge Caliber. The oil change interval recommended by Dodge is every 3,000 to 5,000 miles, or as indicated by the vehicle's oil life monitoring system.
It's important to use the correct oil type and viscosity specified by Dodge for the 2012 Caliber, which is typically 5W-20 or 5W-30 conventional or synthetic motor oil. Using the wrong oil can impact the engine's performance and longevity.
In addition to the 4.5 quarts of oil, the oil filter should also be replaced during each oil change service. The filter helps remove impurities from the oil, keeping the engine lubricated and protected.p>
Following the recommended oil change intervals and using the proper oil type is crucial for maintaining the 2012 Dodge Caliber's engine health and ensuring optimal performance.
How many gallons does a Dodge Caliber hold?
13.6 gal
Fuel & MPG
312.8/367.2 mi. 13.6 gal.
What oil does a 2012 Dodge take?
For a 2012 RAM 1500, it's suggested to use 5W-20 engine oil. This variety of oil is a thinner oil that is great for those engines that tend to create a lot of friction. So why is 5W-20 so important? This is a great all-weather oil.
How many quarts of oil does a 2.0 take?
Capacities and Specifications - 2.0L EcoBoost
| Item | Capacity |
|---|---|
| Engine oil (with oil filter). | 5.7 qt (5.4 L) |
| Engine coolant. | 8.5 qt (8 L) |
| Brake fluid. | Between MIN/MAX on brake fluid reservoir |
| Rear differential fluid (All Wheel Drive). | 2.4 pt (1.15 L) |
How many quarts of oil does a Dodge take?
The 4.7 holds 6 quarts of 5W30.
How much oil does a 3.6 liter Dodge engine hold?
5.9 quarts
Oil Grade: SEO11
| Viscosity: | 5W-20 (All TEMPS) |
|---|---|
| Capacity: | 5.9 quarts (with filter). After refill check oil level. |
| Torque: | 20 ft/lbs (Oil Drain Plug) |
How much oil does a 2.4 L Dodge Caliber take?
Oil Grade: API*
| Viscosity: | 5W-20 (All TEMPS) |
|---|---|
| Capacity: | 4.5 quarts (with filter). After refill check oil level. |
| Torque: | 30 ft/lbs (Oil Drain Plug) |
Which engine oil is best for a Dodge Caliber?
- Mobil 1 Full Synthetic Engine Oil 5W-20 1 Quart.
- Mobil 1 Full Synthetic Engine Oil 5W-20 5 Quart.
- Mobil 1 Extended Performance Full Synthetic Engine Oil 5W-20 1 Quart.
- Valvoline Restore & Protect Full Synthetic Engine Oil 5W-20 5 Quart.
- Valvoline Restore & Protect Full Synthetic Engine Oil 5W-20 1 Quart.
What kind of oil does a Dodge Caliber 2.0 take?
AMSOIL OE 5W-20 100% Synthetic Motor Oil.
How much oil does a 2012 Dodge Caliber take?
4.5 quarts
Capacity: 4.5 quarts (with filter). After refill check oil level.
How many quarts of oil does a 2012 Dodge?
The 2012 Dodge Journey 3.6L engine oil capacity is 5.9 US quarts (5.5 liters) and 4.5 US quarts (4.2 liters) for the 2.4L engine.
