How many quarts of oil does a 2016 Chevy Equinox take?
It depends on the engine. The 2016 Equinox requires about 4.8 quarts with a filter for the 2.4-liter four-cylinder, or about 5.7 quarts with a filter for the 3.6-liter V6.
Engine options and oil capacities
The 2016 Equinox was offered with two engines, and each has a different oil capacity. The capacities below assume a standard OEM oil filter is used.
- 2.4L I-4 engine: oil capacity ~4.8 quarts (with filter).
- 3.6L V6 engine: oil capacity ~5.7 quarts (with filter).
Note: Always verify the exact capacity for your specific vehicle using the owner's manual or a GM dealership, since slight variations can occur by model year or trim.
Oil type and maintenance guidelines
Using the correct oil specification and following proper change intervals helps protect the engine. The guidance below covers common practice for the 2016 Equinox, but always confirm with the manual or dealer.
- Use the recommended oil specification, typically Dexos1 Gen 2 5W-30, unless your manual specifies a different grade.
- Replace the oil filter at every oil change to maintain filtration efficiency.
- Pour in the full capacity listed for your engine, then recheck the level with the dipstick and add in small increments if needed to reach the Full mark.
- Recycle used oil and oil filters responsibly and reset any maintenance reminders after the change.
Following these steps helps ensure you replace the correct amount of oil and maintain proper lubrication after a change.
Summary
The 2016 Chevrolet Equinox requires about 4.8 quarts of oil for the 2.4L engine and about 5.7 quarts for the 3.6L engine, both including the oil filter. Always confirm the exact capacity for your vehicle in the owner's manual or with a dealer, and use the oil grade specified for your engine (typically Dexos1 Gen 2 5W-30).
