How many quarts of oil does a Chevy Traverse take?
The Chevy Traverse typically requires about 5.7 quarts of engine oil when you perform an oil change with a filter. The exact capacity depends on the engine choice and model year, so it's important to confirm for your specific vehicle.
In this article, we'll outline the standard capacity for the most common engine and explain how to verify the right amount for your Traverse.
Common engine configuration and capacity
Below is the engine configuration most commonly found in recent Chevy Traverse models and its official oil capacity. The numbers come from GM's specifications and the owner's manuals; always check your own vehicle's label and manual for the precise figure.
- 3.6L V6 engine (the standard and most common engine in Traverses in recent years): 5.7 quarts (with oil filter)
Note: If your Traverse uses a different engine in a particular year or trim, the capacity may differ. Always confirm with the vehicle's under-hood label or the official owner's manual.
Additional maintenance considerations
When performing an oil change, it's not only about the capacity. Use the recommended oil grade for your engine (for many Traverse models it's 0W-20 or 5W-30 depending on year), replace the filter, and reset the oil life monitor after service.
Summary
Most Chevrolet Traverse models with the 3.6L V6 require 5.7 quarts of engine oil with a filter. Always verify for your specific model year and engine by checking the owner's manual or the under-hood information label.
