How many quarts of oil does a Dodge Nitro take?
The Dodge Nitro’s oil capacity depends on the engine. The 3.7-liter V6 requires about 5 quarts of engine oil with a filter, while the 4.0-liter V6 requires about 6 quarts with a filter. Always verify against your owner’s manual for your exact model year.
Engine configurations and oil capacity
3.7-liter V6
The 3.7L V6 is the smaller option in most Nitro trims, and its oil capacity is commonly listed as five quarts during an oil change with a new filter.
Capacity for the 3.7L V6:
- 5 quarts (with filter)
Note: If you use a different filter or drain more oil, consult the manual to confirm the exact requirement for your vehicle.
4.0-liter V6
The 4.0L V6 is a larger option that generally takes more oil. The typical capacity is six quarts with a new filter during an oil change.
Capacity for the 4.0L V6:
- 6 quarts (with filter)
Conclusion: The 4.0L engine needs roughly one extra quart compared with the 3.7L version.
Practical maintenance tips
Before performing an oil change or topping off, keep these steps in mind to ensure you add the correct amount and avoid overfill.
- Park on a level surface and apply the parking brake.
- Run the engine briefly to warm the oil, then power it off and wait several minutes for the oil to settle.
- Remove the oil fill cap to gauge space for oil as you add it.
- Pour oil gradually, pausing to check the dipstick after each addition.
- Reinstall the dipstick, start the engine, and let it run for a minute before rechecking the level on the dipstick with the engine off.
After following these steps, the dipstick should indicate the oil is within the recommended range. If unsure, consult a qualified mechanic.
Summary
In summary, the Dodge Nitro’s oil capacity varies by engine: approximately 5 quarts for the 3.7L V6 and about 6 quarts for the 4.0L V6, both with a filter. Always confirm with the owner’s manual for your exact year and model, and use the dipstick to verify the correct fill level after an oil change.
