How many quarts of oil does a F250 6.2 take?
The 6.2-liter V8 in most Ford F-250 models typically requires seven quarts of engine oil with a new filter. Exact capacity can vary slightly by model year and configuration, so always check the owner's manual for your truck.
Oil capacity for the 6.2L V8 in the F-250
The following figure reflects the standard factory specification used for many 6.2L F-250 variants when performing an oil change.
- Oil capacity: 7 quarts (with filter change).
For precise numbers on your specific year and trim, consult the owner's manual or contact a Ford dealer, as some late-model or special editions may have minor variations.
Maintenance considerations
When changing the oil, use the recommended grade and viscosity for your climate and year. After installation, run the engine, recheck the level with the dipstick, and reset any oil-change indicators if your vehicle is equipped with them.
Summary
In brief, a Ford F-250 with the 6.2L V8 generally takes seven quarts of oil with a new filter. Always verify the exact specification for your model year in the owner's manual to ensure accuracy.
What oil does a 2012 F250 6.2 take?
The correct oil for a 2012 Ford F-250 with a 6.2L engine is SAE 5W-20. You will need approximately 7 quarts of oil and should use a full synthetic oil that meets the Ford specifications for gasoline engines, such as Motorcraft or an equivalent oil with the API "Certification Mark".
Oil specifications
- Viscosity: 5W-20
- Capacity: 7 quarts (with filter)
- Type: Full synthetic motor oil is recommended, such as Motorcraft.
- Certification: Look for an oil that meets API SN requirements and displays the API Certification Mark.
What kind of oil does a Ford 6.2 gas take?
The recommended oil for a Ford 6.2L engine is SAE 5W-30, preferably a synthetic blend or full synthetic, with the specific Ford specification being WSS-M2C946-B1. While some older models may have the oil cap labeled with "5W-20", many sources and the manufacturer revised the recommendation to 5W-30 for improved performance, especially with the variable valve timing. You will need approximately 7 quarts of oil.
Key details
- Viscosity: SAE 5W-30
- Specification: WSS-M2C946-B1 or newer (check your owner's manual for the most precise specification for your model year)
- Oil type: Synthetic blend or full synthetic are recommended
- Capacity: Approximately 7 quarts (6.6 liters)
- Important Note: Some engine oil caps may say "5W-20," but Ford revised the recommendation to 5W-30 for many models. It is best to use the 5W-30 with the correct specification to ensure proper engine performance and protection.
How much oil does a 6.2 L f250 take?
The oil capacity for a 6.2L Ford F-250 is 7 quarts (6.6 liters) with a filter change. It is important to check the owner's manual for the correct oil specification, which is typically SAE 5W-30 for this engine.
- Capacity: 7 quarts (6.6 L)
- Recommendation: Always verify the correct oil specification in your owner's manual, as it can vary by model year.
- Checking the level: After refilling, check the oil level and add more if necessary.
How many quarts of oil does a 6.2 L take?
The 6.2L engine oil capacity varies by vehicle, but it is commonly 8 quarts for GM engines and 6.6 liters (approximately 7 quarts) for Ford engines. Always confirm the exact capacity for your specific vehicle by checking the owner's manual or the oil fill cap, and be sure to change the oil filter during each oil change.
GM 6.2L engines
- Capacity: 8 quarts (with filter)
- Engine examples: Chevrolet Silverado, GMC Sierra, Chevrolet Tahoe, GMC Yukon
- Note: Always use the viscosity recommended in your owner's manual or on the oil cap.
Ford 6.2L engines
- Capacity: 6.6 liters or approximately 7 quarts (with filter)
- Engine examples: Ford F-250
- Note: Check your owner's manual for the recommended viscosity, which is often 5W-30.
