What is the bolt pattern on a Ford Excursion?
The Ford Excursion uses an eight-lug bolt pattern on a 170 mm bolt circle (8x170, about 6.69 inches).
The Excursion, produced from 2000 to 2005, sits on Ford’s heavy-duty Super Duty platform. Its wheel pattern is distinct from the lighter F-150’s five-llug layout, and it largely aligns with other 3/4- and 1-ton Ford trucks of that era. When swapping wheels, it’s essential to match both the lug count and the bolt circle to ensure proper fit and safe operation.
Bolt pattern basics
To understand what fits on an Excursion, consider these core details about its bolt pattern.
- Lug count: 8
- Bolt circle diameter: 170 mm
- Equivalent measurement in inches: 6.69 inches
- Typical compatibility: shared with Ford heavy-duty trucks from the same generation, such as 1999–2005 F-250/F-350 Super Duty models
- Year range for this pattern on the Excursion: 1999–2005 (varies by specific build and market)
Wheels that do not match the 8x170 bolt pattern will not seat properly, and attempting to force-fit wheels can lead to unsafe driving conditions. Always confirm both pattern and hub compatibility before purchasing replacements.
Year and compatibility notes
In practice, the Excursion shares its lug arrangement with its heavy-duty siblings from the same era, which simplifies finding aftermarket wheels designed for 8x170. However, not all wheels marketed for Ford trucks are interchangeable across all model lines; confirm the pattern, center bore, and lug nut seating when shopping for wheels or adapters.
- Primary reference: 8x170 bolt pattern for Excursion and related Super Duty vehicles from the late 1990s to mid-2000s
- Cross-compatibility caveat: 8x170 wheels intended for Excursion and 3/4- to 1-ton Ford trucks are generally compatible within that group, but not with 5-lug lighter-F-Series patterns
- Center bore and hub considerations: verify hub size or use appropriate hub-centric rings to avoid vibrations
- Professional confirmation: when in doubt, consult a wheel and tire specialist or refer to the vehicle’s VIN-specific spec sheet
With the right pattern and proper fitment, owners can source a wide range of aftermarkets and OEM take-offs designed for the Excursion’s 8x170 setup, though availability may vary by market and year.
How to verify fit on your Excursion
Use these steps to confirm your wheels match the vehicle’s bolt pattern and hub requirements before buying or mounting new wheels.
- Check the owner’s manual or door jamb sticker for wheel specifications, focusing on lug pattern and lug size.
- Count the lug holes on the wheel hub to confirm there are eight lugs.
- Measure the bolt circle: measure from the center of one lug hole to the center of the opposite lug hole across the hub; you should aim for 170 mm (6.69 in).
- Verify center bore compatibility: ensure the wheel’s hub opening matches the Excursion’s hub, or plan to use hub-centric rings if needed.
- Consult a professional if you’re uncertain about compatibility with specific aftermarket wheels or spacers.
Following these steps helps ensure safe installation and optimal ride quality when upgrading or replacing wheels on a Ford Excursion.
Summary
The Ford Excursion runs on an 8x170 bolt pattern (eight lugs on a 170 mm circle, about 6.69 inches). This setup is shared with Ford’s late-1990s to mid-2000s heavy-duty trucks, making compatible wheels fairly common within that family. Always verify lug count, bolt circle, center bore, and hub compatibility before purchasing wheels to ensure a proper, safe fit.
What vehicles have a 6x120 lug pattern?
Vehicles with a 6x120 bolt pattern include many Buick, Cadillac, Chevrolet, and GMC models, such as the Buick Enclave, Cadillac XT5, Chevrolet Colorado, and GMC Acadia. This bolt pattern is also found on some Ford and Saab vehicles.
Buick
- Enclave (2018-2026)
- GL8 ES, LS, PHEV (2024-2026)
- Electra E4, E4 GS (2023-2025)
- Electra E5 (2023-2026)
- Century (2022-2025)
Cadillac
- XT5 (2016-2025)
- XT6 (2019-2025)
- SRX (2010-2017)
- Optiq, Optiq-V (2023-2026)
Chevrolet
Colorado (2015-2023), Traverse (2018-2023), Blazer, and Trailblazer (2021-2023).
GMC
Acadia (2017-2023), Canyon (2015-2023), and Terrain (2017-2023).
What is the bolt pattern for a 2000 Ford Excursion?
8x170
Available for sale online in sizes such as 15", 16", 17", 18", 19", 20", 22", and 24" in the 8x170 bolt pattern, BB Wheels offers a wide selection of 2000 - 2005 Ford Excursion rims.
When did Ford switch from 8x6.5 to 8x170?
1999
Ford , GM, dodge all had 8x6. 5 bolt pattern from pre 1980 all the way until 1999 and that's when ford changed to 8x170.
What lug pattern is a Ford Excursion?
8x170mm
Ford Excursion Bolt Pattern & Recommended Fitment Range
The Excursion was compatible with an 8x170mm bolt pattern throughout its entire existence, and its wheel and tire recommendation is equally large.
