How many quarts of oil does a Toyota Crown take?
Typically about 4.5–5.3 quarts (4.3–5.0 L) of engine oil, depending on the Crown’s engine variant and whether a filter is included.
In practice, the Crown is offered with multiple engines depending on the market and model year. Oil capacity figures can vary slightly by country and by whether you’re performing a full oil change with a new filter. This article outlines the typical capacities and related maintenance guidelines.
Engine options and oil capacity
Here are the commonly cited oil capacities for the Crown variants most often seen in markets outside North America. Values are for a full oil change with a new filter; if you are not replacing the filter, the amount can be slightly different.
Why capacities vary
The Crown line uses more than one engine option across different regions and years. Each engine has its own oil capacity specification, and the addition of a new oil filter during a change increases the total amount of oil required.
- 2.5-liter hybrid (A25A-FXS): approximately 4.4–4.8 quarts (4.2–4.5 L) with filter.
- 2.4-liter turbo (A25AFT): approximately 5.0–5.3 quarts (4.8–5.0 L) with filter.
Note: Exact capacity varies by model year and market. Always consult the owner’s manual or the oil-capacity sticker under the hood for your specific Crown variant.
Oil type and maintenance intervals
Toyota’s recommendations cover oil grade and service intervals, which can depend on climate, driving style, and model variant.
- Recommended oil grade: typically 0W-20 synthetic for most Crown engines, with Toyota-approved synthetics or equivalent.
- Alternatives: in some markets or for certain engines, 5W-30 synthetic may be permitted; always follow the manual.
- Change interval: under normal service, oil and filter are commonly changed every 10,000 miles (16,000 km) or 12 months, whichever comes first; severe service conditions may require shorter intervals.
For precise guidance, refer to the owner’s manual for your exact Crown model year and market, as specifications can vary.
Maintenance tips
Keep track of service intervals using the vehicle’s maintenance reminder system, and use the recommended oil type and capacity to avoid overfill or underfill. If you’re unsure, consult a certified Toyota technician.
Summary
The Toyota Crown’s oil capacity is not a single figure; it depends on the engine: around 4.4–4.8 quarts for the 2.5L hybrid and about 5.0–5.3 quarts for the 2.4L turbo, with the numbers reflecting a full change using a new filter. Always confirm exact figures in the owner’s manual for your specific model year and market.
How many quarts of oil does a 3.6 v6 engine take?
The SXT's have the 3.6 v6 so it would take 6qts of oil.
What kind of oil does a Toyota Crown 2025 take?
The 2025 Toyota Crown requires 0W-8 synthetic motor oil that meets the JASO GLV-1 standard. It's crucial to use this specific viscosity and grade to ensure proper engine function and longevity. You can confirm the exact requirement on the oil cap or in the owner's manual, and it is important to follow the manufacturer's specifications.
Key specifications
- Oil type: Full synthetic
- Viscosity: 0W-8 (suitable for all temperatures)
- Oil grade: GLV-1
- Capacity: 4.5 quarts (with filter)
- Drain plug torque: 30 ft-lbs
- Important: Always use a new drain plug gasket and consider using an OE (Original Equipment) drain plug.
Where to find this information
- Your vehicle's oil cap: This is the most reliable source for the correct oil viscosity.
- Your owner's manual: The manual will have detailed information on oil type and capacity.
- Toyota's website or parts center: You can find genuine Toyota oil that meets the specifications on the official site.
How much oil does a 2025 Toyota Crown 2.5 take?
4.5 quarts
4.5 quarts (with filter).
How much oil does a Toyota Crown take?
And the capacity you're looking at 4.5 quarts with a new filter.
