How many quarts of oil does a Toyota Highlander hold?
Oil capacity varies by engine and year. In the current Highlander lineup, expect about 4.8–5.5 quarts for most configurations, with older V6 variants requiring around 6.4 quarts.
To understand the question in detail, it’s important to identify the engine type installed in a given Highlander. The oil capacity is not identical across generations or trims, so the exact figure depends on whether the vehicle uses a gasoline four-cylinder, a V6, or a hybrid powertrain.
Engine options and oil capacity
The Highlander has used several engines across generations. The capacities listed below reflect typical factory specifications for common configurations. Always confirm with your vehicle’s manual or the fill cap for your exact year and trim.
- 2.4L turbocharged inline-4 gasoline engine (current generation): 5.5 quarts with filter
- 3.5L V6 gasoline engine (older generations or certain trims): 6.4–6.6 quarts with filter
- 2.5L hybrid powertrain (Highlander Hybrid): about 4.7–4.8 quarts with filter
Note: Capacity can vary by year and market, and replacing the oil filter can affect the total fill. When in doubt, consult the owner's manual or a Toyota service professional for the exact specification for your vehicle.
Additional maintenance considerations
Beyond capacity, Toyota specifies the correct oil type and viscosity for each engine. For most modern Highlanders, 0W-20 full-synthetic oil is commonly recommended, though some models and markets may differ. Always verify the exact viscosity recommended for your vehicle’s year and engine.
How to verify your specific capacity
To confirm the exact oil capacity for your Highlander, check the owner’s manual, the oil-fill cap, or Toyota’s official service resources. A dealership or certified technician can pull up the precise specification by VIN and trim if needed.
In practice, when performing an oil change, use the quoted capacity for your engine variant and account for the filter. If you’re unsure, err on the side of a slightly underfilled calculation and add a little at a time after starting the engine, then recheck with the dipstick.
Summary: The Toyota Highlander’s oil capacity ranges from roughly 4.7–4.8 quarts for the Hybrid, about 5.5 quarts for the 2.4L turbo gasoline, and around 6.4–6.6 quarts for the traditional V6, with exact figures dependent on model year and configuration.
How many quarts of oil does a 3.3 L V6 take?
6.0 qt
Materials
| Variant | Including the Oil Filter |
|---|---|
| All. | 6.0 qt (5.7 L) |
How much oil does a 2.5 L 4 cylinder take?
2.5L 4-cylinder engine (FB25):
Recommended oil: 0W-20 synthetic oil. Oil capacity: Approximately 5.1 quarts (with filter)
How much oil does a 3.5 L V6 Toyota engine take?
6.1 quarts
3.5L V6 Engine: 6.1 quarts with filter. 2.5L Hybrid Engine: 4.5 quarts with filter.
How many quarts of oil does a Toyota Highlander V6 take?
A Toyota Highlander V6 engine generally takes 5.8 quarts of oil for a filter change, though some model years may require up to 6.1 to 6.4 quarts. It's best to check your owner's manual or use the dipstick to ensure the correct level after the oil change.
- For many newer models (2017-2022+): The capacity is often cited as 5.8 quarts.
- For some older or specific models: Capacities of 6.1 or 6.4 quarts have been reported.
- Always verify: After adding about 5 quarts, check the dipstick and add more as needed until you reach the full mark.
