Loading

How many quarts of oil for a Dodge?

There isn’t a single number that applies to every Dodge vehicle—the oil capacity depends on the model and engine, but most modern Dodges require roughly 5 to 7 quarts of oil when changing the filter.


To determine the exact quantity for your specific vehicle, consult the owner's manual, check the under-hood oil-capacity label, or look up your VIN on Dodge’s official resources. Use the dipstick as you add oil to ensure you stop at the correct full mark, and avoid overfilling, which can cause engine problems.


Common Dodge engines and typical oil capacities


Engine choices in Dodge models span from compact four-cylinders to large V8s, and each has its own recommended fill. The figures below reflect capacities commonly cited for widely used engines, with the caveat that exact figures can vary by model year and whether a filter is included.



  • 3.6L Pentastar V6 — around 6 quarts (about 5.9 quarts) with filter

  • 5.7L Hemi V8 — about 7 quarts with filter

  • 6.2L Supercharged Hemi (Hellcat family) — roughly 7–8 quarts with filter

  • 3.0L EcoDiesel V6 — about 6 quarts with filter


Note: These figures are approximate and intended as a general guide. For a precise specification, verify with the official Dodge or Stellantis documentation for your exact model and year.


How to determine the exact oil capacity for your Dodge


To confirm your exact oil capacity and follow the correct maintenance schedule, perform these steps:



  1. Locate your owner's manual or the digital manual for your vehicle model.

  2. Check the Specifications or Maintenance section for "Oil capacity" or "Engine oil capacity" with the filter included.

  3. Inspect the under-hood oil-capacity sticker, usually near the dipstick or on the radiator support.

  4. If the manual is unavailable, search Dodge's official support site or use the VIN to pull model-specific data from Mopar or dealer portals.

  5. Ensure you use the recommended oil grade (for many modern Dodges, 0W-20 or 5W-30 depending on engine) and change the oil filter when you change the oil.

  6. During an oil fill, add gradually and recheck with the dipstick to avoid overfilling.


If you have a modified or unusual engine (high-performance versions, swapped engines, or diesel variants), consult a professional mechanic for the exact capacity.


Summary


Oil capacity in Dodge vehicles varies by model and engine, typically falling within a few-quart range. Use the owner's manual, under-hood label, or official Dodge resources to confirm the exact number for your vehicle, and always verify with the dipstick as you fill. Following the correct capacity helps maintain engine health and performance.

Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.