How many quarts of oil go in a 2004 Acura TL?
Regular oil changes are essential for maintaining the performance and longevity of your vehicle. If you own a 2004 Acura TL, knowing the correct oil capacity is crucial to ensure your engine runs smoothly and efficiently. In this article, we’ll provide a detailed answer to this common question and offer some tips for proper oil maintenance.
Oil Capacity for the 2004 Acura TL
The 2004 Acura TL has a 3.2-liter V6 engine, and its oil capacity depends on whether you are changing the oil filter during the oil change:
- With an oil filter change: The engine requires approximately 4.5 quarts of oil.
- Without an oil filter change: The engine requires slightly less, around 4.2 quarts of oil.
It’s always a good idea to check your owner’s manual for the most accurate information specific to your vehicle. Additionally, ensure you use the recommended oil type, which for the 2004 Acura TL is typically 5W-20 or 5W-30, depending on your climate and driving conditions.
Steps for Changing the Oil in a 2004 Acura TL
If you’re planning to change the oil yourself, follow these steps to ensure a smooth process:
- Step 1: Gather your tools and supplies, including the correct oil type, a new oil filter, a wrench, a drain pan, and a funnel.
- Step 2: Warm up the engine for a few minutes to help the oil flow more easily, then turn off the car.
- Step 3: Locate the oil drain plug underneath the car and place the drain pan beneath it.
- Step 4: Remove the drain plug and allow the old oil to drain completely.
- Step 5: Replace the drain plug and remove the old oil filter. Install the new oil filter, ensuring it is properly tightened.
- Step 6: Add the new oil using a funnel, starting with 4 quarts. Check the oil level with the dipstick and add more as needed until it reaches the recommended level.
- Step 7: Start the engine and let it run for a minute, then check for leaks and recheck the oil level. Top off if necessary.
Tips for Maintaining Your Acura TL’s Engine
To keep your 2004 Acura TL running smoothly, follow these maintenance tips:
- Stick to a regular oil change schedule, typically every 5,000 to 7,500 miles, depending on your driving habits and oil type.
- Use high-quality oil and filters to ensure optimal engine performance.
- Check your oil level regularly, especially before long trips, to avoid running low on oil.
- Pay attention to warning lights on your dashboard, such as the oil pressure light, and address any issues promptly.
By following these guidelines, you can ensure your Acura TL remains reliable and efficient for years to come. If you’re ever unsure about performing an oil change yourself, don’t hesitate to visit a trusted auto repair shop like Kevin’s Autos for professional assistance!
Frequently Asked Questions
How much oil does a 3.5 l Acura TL take?
Fill the oil, just shy of an entire five quart bottle, as the TL uses 4.5 quarts total. Remove the oil drain pan from under the vehicle if not done so already. Take the vehicle down off the jack stands. Start the vehicle and let it run for several minutes.
What is the difference between 5w20 and 5W30?
As already said, both 5W-20 and 5W-30 are the same viscosity when the engine is cold. The 5W-20, however, will remain a little thinner once you reach operating temperature to help improve fuel economy and flow fast enough to fill the tight tolerances in the engine.
What is the best oil for Acura TL 04?
If you own a TL between model years 2004-2014, your engine's recommended oil is 5W-20, a fully synthetic oil; if your Acura TL model is even older, from model years 1999-2003, the most versatile and safe oil to use in your engine is 5W-30 synthetic oil.
What kind of oil does a Acura TL 3.7 take?
AMSOIL 5W-20 100% Synthetic High-Mileage Motor Oil.
How much oil does a 2.4 L 4 cylinder engine take?
4.5 quarts
4.5 quarts (with filter). After refill check oil level.
How much oil does a 2004 TL take?
Oil Grade: API*
| Viscosity: | 5W-20, 0W-20 (All TEMPS) - Acura Engine Oil Application Guide (Rev. 12/1/11) indicates that 0W-20 is acceptable to use in this application. |
|---|---|
| Capacity: | 4.2 quarts. w/of. After refill check oil level. |
| Capacity: | 4.5 quarts (with filter). After refill check oil level. |
| Torque: | 29 ft/lbs (Oil Drain Plug) |
How much oil does a 2.4 l Acura take?
Oil Grade: API*
Capacity: 4.6 quarts (with filter).
How much oil does a 2.4 L 4 cylinder Honda take?
4.2 quarts. w/of. After refill check oil level.
How much oil does a 2004 Acura TL take?
4.5 quarts
Oil Grade: API*
| Viscosity: | 5W-20, 0W-20 (All TEMPS) - Acura Engine Oil Application Guide (Rev. 12/1/11) indicates that 0W-20 is acceptable to use in this application. |
|---|---|
| Capacity: | 4.2 quarts. w/of. After refill check oil level. |
| Capacity: | 4.5 quarts (with filter). After refill check oil level. |
| Torque: | 29 ft/lbs (Oil Drain Plug) |
How many quarts does a 3.5 V6 hold?
Capacities and Specifications - 3.5L Ecoboost
| Item | Capacity |
|---|---|
| Engine oil (with oil filter) | 6.0 qt (5.7 L) |
| Engine coolant | 13.1 qt (12.4 L) |
| Brake fluid | Between MIN/MAX on brake fluid reservoir |
| Rear axle fluid (four-wheel drive) | 2.11 pt (1.0 L) |
