How many quarts of transmission fluid does a 2011 Dodge Durango take?
The Durango typically requires about 12 quarts of transmission fluid for a full fill, with common ranges around 11–13 quarts depending on the engine and transmission. A simple drain-and-fill usually takes about 5–7 quarts, while a complete flush can require roughly 12–14 quarts depending on the service method and configuration.
In 2011, Dodge offered multiple engines and transmissions in the Durango, so the exact amount depends on your specific powertrain. The most common setups were a 3.6-liter Pentastar V6 with a six-speed automatic and, less frequently, a larger V8 option. For an exact figure tailored to your VIN, consult the owner's manual or a Chrysler/Fiat service bulletin.
Common configurations and transmission fluid capacities
Overview
These figures reflect the typical ranges for the 2011 Durango’s popular configurations. Exact numbers can vary by VIN and service method.
- 3.6L Pentastar V6 with a six-speed automatic (62TE): total capacity around 12 quarts; drain-and-fill typically 5–7 quarts; full flush around 12–14 quarts depending on whether the cooler lines and torque converter are included in the service.
- 5.7L Hemi V8 with an automatic transmission: total capacity roughly in the 12–14 quart range; drain-and-fill about 6–9 quarts; full flush about 12–14 quarts.
These are approximate figures and can vary based on the exact transmission model, cooling hookups, and whether a pan gasket/filter change is performed. Always verify with the vehicle’s manual or a dealer service publication for your specific VIN.
Summary
In short, a full transmission fluid fill for a 2011 Dodge Durango is typically around 12 quarts, with a typical drain-and-fill using about 5–7 quarts. If you’re planning a service, consult your owner's manual or a dealer to confirm the precise quantity for your exact configuration.
