How much are Honda Pilot rotors?
Prices vary, but typical ranges are: front rotors (OEM) about $60–$120 each; rear rotors about $40–$90 each. Aftermarket options are usually cheaper for standard rotors, while premium drilled or slotted designs can run $60–$120 per rotor. Labor to replace rotors generally adds about $100–$250 per axle, so total installed costs typically fall in the $150–$350 per axle range depending on parts and location.
Understanding rotor pricing for the Honda Pilot requires looking at the year and trim, whether you’re buying OEM or aftermarket parts, and whether you replace pads at the same time. The Pilot’s front rotors are typically larger and more heavily used than the rear rotors, and some generations use different rotor sizes. Availability, warranties, and whether wear sensors are included can also affect the final price. Shop pricing can vary by retailer, region, and whether components are purchased as part of a brake kit.
Rotor pricing: OEM vs aftermarket
Below are common options you’ll encounter when shopping for Honda Pilot rotors. Each category reflects typical price ranges and what you get with the part.
- OEM front rotors — generally $60–$120 per rotor. Per Honda specifications, these are designed to match factory performance and often come with dealer warranties; availability can be year/trim dependent.
- OEM rear rotors — generally $40–$90 per rotor. Rear rotors are usually less expensive than front due to size and material; still designed to fit precisely with Honda components.
- Standard aftermarket rotors — commonly $25–$60 per rotor. These are non-OEM options that fit a range of vehicles; price varies by brand and quality.
- Premium aftermarket rotors (drilled/slotted or high-performance) — typically $60–$120 per rotor. Higher heat management and performance features drive the price higher.
Prices vary by year, trim, and retailer, and some rotors may include wear sensors or be bundled with pads or hardware. Always verify compatibility with your exact Honda Pilot model when shopping.
Labor and total cost considerations
To replace rotors, most shops bill by axle, and regional labor rates can affect the total you pay. Here’s a general breakdown you’ll likely encounter.
- Labor to replace rotors on one axle (front or rear) typically takes 1–2 hours, with hourly rates around $80–$150 depending on location and shop level.
- Installed cost per axle (parts + labor) often falls in the $150–$350 range for standard rotors, with OEM or premium parts pushing costs higher.
- Rotor resurfacing (where allowed) is usually cheaper than full replacement, but many newer Hondas require rotor replacement if the rotor thickness is below the minimum spec.
Many drivers replace pads at the same time as rotors to ensure even wear and optimal braking performance, which can add to the overall cost but improves safety and longevity.
Buying tips for Honda Pilot rotors
Helpful guidance for selecting the right rotors and budgeting:
- Confirm your exact year, generation, and trim to ensure correct rotor size and mounting configuration.
- Decide between OEM and aftermarket based on budget, warranty, and performance needs; OEM parts tend to fit and seal as designed, while aftermarket options may offer cost savings.
- Check whether wear sensors are included or must be purchased separately; sensors can add to the cost if required for your vehicle.
- Request a detailed estimate that separates part costs from labor, and specify whether you’re planning to replace pads at the same time.
For best results, have a trusted shop inspect rotor thickness and run a brake system check to determine if replacement or resurfacing is needed, and ensure proper bedding-in of new rotors and pads for optimal performance.
Summary
Honda Pilot rotor prices span a broad spectrum depending on rotor position (front vs rear), the choice between OEM and aftermarket parts, and whether you select standard or premium designs. Typical ranges are roughly $60–$120 per front rotor and $40–$90 per rear rotor for OEM parts, with aftermarket options often starting around $25–$60 for standard rotors and $60–$120 for premium variants. Labor and total installed costs usually add about $150–$350 per axle, influenced by regional rates and part choices. Always verify compatibility with your exact vehicle and consider replacing pads concurrently to ensure consistent braking performance and value.
How much are rotors for a Honda Pilot?
| Car | Service | Shop/Dealer Price |
|---|---|---|
| 2020 Honda PilotV6-3.5L | Service typeBrake Rotor/Disc - Rear Replacement | Shop/Dealer Price$791.46 - $1161.56 |
| 2016 Honda PilotV6-3.5L | Service typeBrake Rotor/Disc - Rear Replacement | Shop/Dealer Price$791.44 - $1161.53 |
How much to get 4 rotors replaced?
Replacing all four brake rotors typically costs between $600$ 600$600 and $1,200$ 1 comma 200$1,200, which includes parts and labor for most vehicles. However, the final price can vary significantly depending on factors like the vehicle's make and model, the quality of the parts used, and local labor rates. Luxury or performance vehicles will likely be on the higher end of this range or exceed it.
Cost breakdown and factors
- Parts: Rotors alone can cost anywhere from $100$ 100$100 to $200$ 200$200 each, with larger trucks and SUVs having even more expensive parts.
- Labor: Expect to pay around $150$ 150$150 to $200$ 200$200 per axle for labor, which is often done in conjunction with replacing the brake pads.
- Vehicle type: The cost is higher for larger vehicles like trucks and SUVs, as well as for luxury or European models due to more expensive parts.
- Part quality: Choosing between OEM (original equipment manufacturer) or high-performance parts versus standard aftermarket parts will change the final price.
- DIY vs. professional: You can save on labor costs by doing the replacement yourself, but this requires the right tools and mechanical knowledge.
What to do
- Get a quote: Obtain a quote from a few different mechanics to compare prices, considering the total cost including parts and labor.
- Consider replacing pads too: It is often more cost-effective to replace both the rotors and the pads at the same time, as a full brake job is typically required for both axles.
- Be wary of "too good to be true" deals: If a quote seems extremely low, it may be an indicator of lower-quality parts or a potential problem with the vehicle that could result in further damage.
Can I drive with bad rotors?
No, you cannot safely drive with bad rotors, especially if they are cracked, as it is a major safety risk due to reduced braking performance and the potential for complete brake failure. Even minor issues like warping can cause vibrations and longer stopping distances, while severe damage can lead to the rotor snapping or the brakes failing completely, endangering you and others. You should get them replaced immediately, driving only for short, necessary trips at low speeds if you absolutely must.
Dangers of driving with bad rotors
- Reduced braking performance: Worn or warped rotors can't create enough friction, which increases stopping distances and gives you less control over your vehicle.
- Vibrations: Warped rotors will cause a pulsating or vibrating sensation in the brake pedal and steering wheel when you brake.
- Increased wear: Bad rotors can accelerate the wear on brake pads and other brake components, potentially leading to more expensive repairs.
- Risk of brake failure: A rotor can crack or snap, especially if it is worn too thin. This can jam the brake, cause a sudden stop, or even lead to a complete loss of braking on that wheel and potentially the whole system if a brake line is damaged.
- Safety risk: The most significant danger is a higher risk of an accident due to your inability to stop quickly and effectively.
You can watch this video to learn about the symptoms of bad brake rotors: 37sHonest Mechanic ColoradoYouTube · Jan 17, 2024
What to do if your rotors are bad
- Avoid driving: Do not drive the vehicle unless it is absolutely necessary.
- Drive cautiously: If you must drive, do so at a low speed and avoid hard braking.
- Seek immediate repair: Take your vehicle to a mechanic as soon as possible for an inspection and replacement.
- Consider replacement: Depending on the damage, you may need to replace the rotors and pads on an axle to ensure balanced braking.
This video explains when you might need to resurface or replace your brake rotors: 59sBudget MechanicYouTube · Nov 27, 2023
How much does it cost to replace rotors on a Honda Pilot?
Honda Pilot Brake rotor replacement can cost anywhere between $300 - $750 for all four rotors to be replaced. This price estimate includes labor and parts.
