How much did a 1966 Ford F100 cost new?
In 1966, the Ford F100 pickup truck had a starting price of around $2,200 to $2,500 for the base model. This was a significant sum at the time, as the average new car price in the United States was around $2,650 that year. The F100 was Ford's popular half-ton truck model, known for its rugged design and versatility.
Factors Influencing the 1966 Ford F100 Price
The price of the 1966 Ford F100 was determined by several factors, including the truck's features, options, and trim level. The base model F100 came with a standard inline six-cylinder engine and a three-speed manual transmission. Buyers could also choose from a range of V8 engine options, as well as automatic transmissions and various cab and bed configurations, which would increase the overall cost.
Comparing Prices Across Trim Levels
- The base F100 model with the standard six-cylinder engine and manual transmission had a starting price of around $2,200.
- Upgrading to a V8 engine could add $100 to $300 to the price, depending on the specific engine option.
- Choosing an automatic transmission instead of a manual would typically add $200 to $300 to the cost.
- Higher trim levels, such as the Ranger or Custom Cab models, could have a starting price of $2,400 or more.
It's important to note that the prices mentioned are approximate and may have varied depending on the specific dealer, location, and any additional options or accessories added to the truck.
Contextualizing the 1966 Ford F100 Price
In the mid-1960s, the Ford F100 was a popular choice for both work and personal use. The truck's rugged design, versatility, and relatively affordable price point made it a common sight on American roads and job sites. Compared to the average new car price of $2,650 in 1966, the F100's starting price of around $2,200 to $2,500 was relatively accessible for many consumers.
Today, well-preserved and restored 1966 Ford F100 trucks can be highly sought after by collectors and enthusiasts, with prices ranging from tens of thousands to over $100,000, depending on the truck's condition and any modifications or upgrades.
How much did a brand new Ford F100 cost in 1956?
1956 Ford F-100 Facts and Figures
| Spec | 1956 Ford F-100 |
|---|---|
| Starting MSRP | $1,577 (about $15,000 when adj. for inflation) |
| Horsepower + Engine | 133 hp 223 cubic inch “Cost Clipper” V6 or 167 hp 272 cubic inch “Power King” V8 |
| Torque | 202 ft-lbs (V6), 260 lb-ft (V8) |
How much did a 1966 Ford F100 cost new near me?
In 1966, buyers could order a basic F-100 model for $1,950.
What was the top speed of the F-100?
822 miles per hour
It was a single-seat, low-wing monoplane with wings swept back 45 degrees. Its maximum speed was 822 miles per hour (1,323 km/h) at 35,000 feet (11,000 metres), and its ceiling was over 50,000 feet (15,000 metres). The Super Sabre was armed with four 20-millimetre cannons.
How many 1966 Ford F100 were made?
Today, the 1966 Ford F-100 is a cherished collectible with values that range widely based on condition, originality, and provenance. While exact production numbers are hard to pin down, it's estimated that tens of thousands were produced.
How much was a new truck in 1965?
The 1965 Ford-150 base model that sold new starting at $2,395. Remember the good old days when pickup trucks were cheaper than cars and defined the terms “basic” and “Spartan”?
What year was Ford's best truck?
Ford models from 2009 to 2014, known as the 12th generation, introduced some fantastic features that really set the F-150 apart. Also, the 13th generation models, starting from 2015 to 2020, brought some impressive upgrades that made these trucks stand out. These are the best years for Ford F-150.
What engine came in a 1966 Ford F100?
Powertrain
| Engine | Model Years | Power |
|---|---|---|
| 240 CID Straight-6 | 1965–66 | 150 hp (112 kW) |
| 300 CID Straight-6 | 1965–66 | 170 hp (127 kW) |
| 289 CID Windsor V8 (Mexico only) | 1965–66 | 160 hp (119 kW) |
| 352 CID FE V8 | 1964–66 | 208 hp (155 kW) |
What is the value of a 1966 F-100?
The value of a 1966 Ford F-100 1/2 Ton can vary greatly depending on its condition, mileage, options, and history. Typically, you can expect to pay around $17,050 for a 1966 Ford F-100 1/2 Ton in good condition with average spec.
Why did Ford stop making the F-100?
With the F-150 around, the F-100 quickly lost favor in the late '70s, becoming a 4x2-only model after 1979, and dropped entirely from the lineup in 1983 when the compact Ford Ranger essentially replaced it. Bottom line, Ford created the F-150 as a response to both regulatory challenges and shifting consumer demands.
What is the most sought after Ford F100?
The 1965 Ford F-100 is a highly sought-after classic truck that boasts: A unique design. A range of robust engine options. A widened front that seamlessly integrates the cab and front fenders.
