How much do R7000 brake calipers weigh?
The R7000 brake calipers weigh about 199 g per pair, or roughly 99–100 g per caliper. This specification refers to the calipers alone (pads not included) and can vary slightly with finish and manufacturing tolerances.
Official specifications and typical weights
What the numbers indicate
Shimano’s product literature for BR-R7000 lists a pair weight in the vicinity of 199 g. In everyday terms, that’s just under 100 g for each caliper. It’s important to note that this figure is calipers-only; it does not include brake pads, mounting bolts, or cables.
- Calipers (pair): ~199 g
- Per caliper: ~99–100 g
- Pads: not included in the official weight specification
- Hardware: mounting bolts and related components may vary by packaging
These numbers provide a practical baseline for comparing brake weight across road builds, with small variations caused by finish or minor production tolerances.
Variations and what affects the weight
What can shift the scale
Beyond the base spec, several factors can nudge the weight up or down by a few grams per pair:
- Finish and color: different finishes (e.g., black vs metallic) can introduce small weight differences.
- Packaging hardware: some listings include or exclude mounting bolts or other small hardware, affecting total listed weight.
- Pads: if a listing specifies pads, the total weight will be higher because pads are not part of the calipers’ official specification.
In typical scenarios, variations due to finish or packaging are modest, usually within a few grams per pair.
Practical considerations for riders
For riders weighing every gram, the BR-R7000 calipers sit within the standard weight range for entry-to-mid-level road braking systems. If you’re chasing lighter setups, you might compare with higher-end or dedicated lightweight calipers, though the R7000 offers solid performance and compatibility with Ultegra/105-level components. Always verify the exact product page for the specific listing you’re purchasing, since some sellers quote “calipers with pads” or “calipers only” differently.
Summary
In short, the R7000 brake calipers weigh about 199 g per pair (roughly 99–100 g per caliper) with pads not included. Expect minor variations by finish and packaging, but the published figure provides a reliable baseline for planning a weight-conscious road build. For precise numbers, check the specific product page of the exact finish you intend to buy.
How much does a R7000 11 34 cassette weight?
11-34: 11-13-15-17-19-21-23-25-27-30-34 (real weight: 362 g). 12-25: 12-13-14-15-16-17-18-19-21-23-25 (real weight: 261 g).
How much does a R8000 caliper weight?
- Weight (manufacturer, front / rear / pair): 182 / 178 / 360 gr.
How much does a R9170 caliper weight?
Jumping over to the R9170 components to add in disc brakes, each of the hydraulic Di2 shift/brake levers weighed 158g, adding 45g over the rim brake version. But the new Dura-Ace flat mount disc caliper is just 138g, 22g lighter than the rim brake, not figuring in cable housing/wire or hydraulic oil.
How much does a 105 R7000 caliper weight?
- Weight (manufacturer, pair): 379 gr.
