What size thread is a fram PH7317?
The Fram PH7317 oil filter uses a standard 3/4-16 thread size (3/4 inch diameter, 16 threads per inch).
Understanding this measurement helps you avoid mismatches when replacing the filter. This article explains the size, how to verify it on your engine, and how to find compatible Fram or cross-reference filters.
Thread size specification
The PH7317 is designed to thread onto oil ports that accept 3/4-16 filters. This thread standard is common on many American-made and imported engines that use spin-on oil filters.
What 3/4-16 means
3/4-16 refers to a 0.75-inch diameter threaded mounting hole with 16 threads per inch. This combination ensures a proper fit, seal, and torque when the filter is installed with the correct gasket and torque specification.
To avoid confusion, always confirm the exact fitment for your vehicle by checking the owner’s manual, the Fram product page, or your trusted auto parts retailer.
With the right size confirmed, you can proceed to verify compatibility and install the filter confidently.
What you’ll read below explains how to verify the thread size on your engine and where to find reliable cross-references if needed.
Because vehicle specifications can vary, it’s wise to double-check with official sources if you’re unsure.
In summary, most PH7317 installations use 3/4-16 threads, but always verify for your specific vehicle model and engine type.
How to verify the thread size on your engine
Use these practical steps to confirm that the PH7317 will fit your vehicle’s oil port.
- Check your vehicle’s owner’s manual or service manual for the recommended oil filter part number and thread specification.
- Inspect your current oil filter: compare its threaded portion to a 3/4-16 gauge or measure the mounting hole diameter with calipers if you have access to tools.
- Consult Fram’s official product page or packaging for the PH7317 specifications and listed vehicle applications.
- When shopping at an auto parts store, ask a staff member to verify the thread size against your vehicle’s year, make, and model.
By following these steps, you can confirm that the PH7317 will thread correctly and seal properly on your engine.
In short, verifying with the manual or a professional ensures you pick the right filter that threads correctly and seals properly.
Where to find compatible filters and cross-references
If your vehicle requires a specific cross-reference or an alternative model, use these approaches to locate reliable options.
- Refer to Fram’s official product page for the PH7317 to confirm fitment and cross-reference notes.
- Check cross-reference guides from other major filter brands (for example Wix, Purolator, Bosch) to find equivalent part numbers.
- Ask an auto parts specialist to provide a vehicle-specific cross-reference based on your year, make, model, and engine code.
- Use your vehicle’s service database or a trusted retailer’s lookup tool to verify compatibility before purchase.
Using verified cross-references helps avoid mismatches and ensures the filter will thread correctly and seal properly.
Summary
The Fram PH7317 uses a 3/4-16 thread size, a common standard for many spin-on oil filters. Always verify compatibility with your specific vehicle via the manual, Fram’s official resources, or a trusted parts professional. When in doubt, double-check with a local parts counter to ensure you’re selecting the correct filter for your engine.
