How much does a 1951 Ford pickup weight?
Across the 1951 Ford F-Series lineup, curb weights typically fell in the low-to-mid thousands of pounds, with the exact figure depending on model, cab style, bed length, and engine. In brief, a typical 1951 Ford pickup weighs about 2,900 to 3,100 pounds for the half-ton F-1, with heavier variants reaching upward of 4,700 pounds for the largest configurations.
Overview of the 1951 Ford pickup lineup
The 1951 Ford F-Series continued Ford’s postwar pickup lineage, offering multiple weight classes and body configurations. The key determinant of weight is the model designation (F-1, F-2, F-3), along with cab style, bed length and the engine and equipment installed in the truck.
The ranges below reflect common configurations across the 1951 line, not exact factory numbers.
- F-1: half-ton pickups, typically with a standard cab and either a short or medium bed. Expect curb weights roughly in the 2,800–3,100 pound range.
- F-2: three-quarter-ton pickups, heavier-duty by design, often with larger frames and longer beds. Typical curb weights run around 3,600–4,000 pounds.
- F-3: one-ton pickups, the heaviest in the lineup, with the stoutest frames and suspension. Curb weights commonly fall in the 4,000–4,700 pound range.
These figures are approximate and can vary based on engine options (e.g., inline-six versus any V8, if installed), cab and bed configurations, and optional equipment like heaters, radios, or trim accents.
Factors that influence weight
The following elements drive variability in curb weight across 1951 Ford pickups:
- Engine choice and accompanying components (cooling, exhaust, mounts).
- Cab style and seating configuration, including options like heaters or soundproofing.
- Bed length and frame construction, which alter overall mass.
- Drivetrain and suspension components chosen by the factory or added as options.
In practice, two otherwise similar trucks can differ by several dozen to several hundred pounds due to these factors.
How to verify exact curb weight
For precise numbers, collectors and historians rely on factory data sheets, original sales literature, or VIN/build sheets. Weighing the vehicle on a proper scale or consulting service manuals and factory specifications yields the exact curb weight for a specific build.
Summary
The weight of a 1951 Ford pickup depends on the model and configuration. The F-1 half-ton typically ranges from about 2,800 to 3,100 pounds, the F-2 three-quarter-ton from roughly 3,600 to 4,000 pounds, and the F-3 one-ton from about 4,000 to 4,700 pounds. Engine, cab and bed choices, plus optional equipment, all influence the final curb weight. For precise figures, reference the truck’s build sheet or factory documentation.
How much does a Ford pickup truck weigh?
The weight of a Ford pickup truck varies significantly based on the model, configuration, and features. For the F-150, a common range is from approximately 4,021 to 5,540 pounds, depending on factors like cab size, engine, and drivetrain. The weight of other models, such as the F-350 Super Duty or Ranger, falls into different ranges.
Ford F-150
- Lightest configuration: The lightest is typically the XL Regular Cab 4x2 with a 2.7L EcoBoost engine, at about 4,021 pounds.
- Heaviest configuration: The heaviest is often the SuperCrew 4x4 with a 3.5L PowerBoost Full Hybrid V6, weighing around 5,540 pounds.
- Weight variation factors: The weight is affected by engine choice, cab size (Regular, SuperCab, SuperCrew), bed length, and added equipment.
- Electric models: The F-150 Lightning, the electric version, weighs significantly more, with curb weights starting around 6,015 pounds due to its battery pack.
Other Ford pickup models
- Ford F-350 Super Duty: Curb weights vary widely depending on whether it's a single-rear-wheel (SRW) or dual-rear-wheel (DRW) model, and the engine installed. For example, a 6.7L diesel engine on an SRW model can range from 6,553 to 7,732 pounds.
- Ford Ranger: A mid-size truck, the Ranger's curb weight typically ranges from approximately 4,203 to 5,325 pounds, depending on the configuration.
How much does a 1950 Ford F1 weight?
3,060 lbs
About this Ford F1 . . .
This F1 features a 226-CID L-head inline 6-cylinder engine, producing 95 horsepower. It weighs 3,060 lbs and has a 1,480-lb payload. This half-ton truck was produced in Detroit, Michigan, and had an MSRP of $1,175.
What is a 1951 Ford worth today?
Typically, you can expect to pay around $15,014 for a 1951 Ford Deluxe in good condition with average spec. What is the highest selling price of a 1951 Ford Deluxe? The highest selling price of a 1951 Ford Deluxe at auction over the last three years was $36,120.
How much does a 1951 Ford Victoria weight?
Ford built 110,286 Ford Vics in 1951. The 239 CID Flathead engine was one of the most reliable engines ever made and produced 100HP. The wheelbase is 114 inches, length is 197 inches and weighs 3188 pounds.
