What is the lug pattern on a 2024 Chevy 2500?
Eight lugs on a 6.5-inch bolt circle (8x6.5 inches, or 8x165.1 mm) with a 4.75-inch center bore is the standard lug pattern for the 2024 Chevy Silverado 2500HD. This pattern governs which wheels will fit your truck and how they align with the hub.
In practical terms, this means you’ll be looking for wheels that match an 8-lug configuration spaced on a 6.5-inch circle, designed to fit GM heavy‑duty pickups. The pattern applies across most 2024 Silverado 2500HD configurations, including single-rear-wheel and dual-rear-wheel (DRW) models, though wheel width and offset can vary by trim and application.
Pattern essentials
To shop for wheels or verify compatibility, the key measurements to confirm are listed below. This helps ensure proper seating, brake clearance, and hub alignment.
- Bolt pattern (lug arrangement): 8 bolts on a 165.1 mm (6.5 inches) diameter circle
- Center bore: 120.65 mm (4.75 inches)
- Number of lugs: 8
These specifications apply to most 2024 Silverado 2500HD configurations, including DRW versions. Always verify the exact specs for your vehicle using the VIN or your owner’s manual, and consult wheel manufacturers for any compatibility notes, such as hub-centric rings or offset requirements.
Practical implications for buyers and owners
Understanding the lug pattern is essential when replacing wheels, upgrading to aftermarket rims, or ordering studs and lug nuts. Mismatched patterns can prevent proper installation and cause safety issues, so double-check the pattern, center bore, and offset before purchase. If you’re ever unsure, a quick check with a dealer or a trusted tire shop can prevent costly mistakes.
Summary
The 2024 Chevy Silverado 2500HD uses an 8x165.1 mm (8x6.5 in) bolt pattern with a 4.75-inch center bore. This standard applies across most 2500HD configurations, including DRW variants. When buying wheels or tires, confirm these dimensions and consult the vendor about offset and hub-centricity to ensure proper fitment.
