How much does a Subaru driveshaft weight?
The weight of a Subaru driveshaft can vary depending on the specific model and year of the vehicle, but generally, it falls within a range of 15 to 25 pounds (6.8 to 11.3 kilograms).
Understanding Driveshaft Weight
The driveshaft is a crucial component in a Subaru's all-wheel-drive (AWD) system, responsible for transmitting power from the transmission to the rear differential. The weight of the driveshaft is influenced by factors such as the length, diameter, and materials used in its construction.
Longer driveshafts, which are typically found in larger Subaru models, tend to be heavier than shorter ones used in smaller vehicles. Additionally, driveshafts made of heavier materials, such as steel, will weigh more than those constructed with lighter materials, like aluminum.
Typical Driveshaft Weights for Subaru Models
- Subaru Impreza: 15-18 pounds (6.8-8.2 kg)
- Subaru Outback: 18-22 pounds (8.2-10 kg)
- Subaru Ascent: 22-25 pounds (10-11.3 kg)
It's important to note that these weights are approximate and may vary slightly depending on the specific model year and configuration of the Subaru vehicle.
Importance of Driveshaft Weight
The weight of the driveshaft is an important consideration for Subaru owners and mechanics, as it can impact the vehicle's overall performance, fuel efficiency, and handling. A heavier driveshaft can add to the overall weight of the vehicle, which can affect acceleration, braking, and cornering. Conversely, a lighter driveshaft can help improve the vehicle's responsiveness and efficiency.
When servicing or replacing a Subaru driveshaft, it's essential to ensure that the replacement part matches the weight and specifications of the original component to maintain the vehicle's optimal performance and handling characteristics.
How much does the driveshaft weight on the GT86?
Additional information
| Weight | 7.00 kg |
|---|---|
| Make | Toyota |
| Model | BRZ, GT86 |
How long do Subaru driveshaft last?
As far as I can remember, the drive shaft should last the life of the car unless there's an abnormal condition.
What is typical driver shaft weight?
55 to 65 grams
Fitting Tips: Typical shaft weights in 55 to 65 grams but some players with fast transitions may like a heavier 70+ gram shaft. If you think you are losing distance, try a lighter, 55 gram shaft or a counter balanced shaft, but make sure it plays stiff enough.
What is the average price to replace a driveshaft?
$500 to $1000
Usually, the Drive Shaft Repair costs will differ based on what caused the issue and how fast it can be repaired. If you just have to replace it, that would be anywhere from $500 to $1000. However, you can also expect the cost of the parts to be around half that number and the labor costs around $200.
What is the lifespan of a Subaru engine?
200,000 miles
Engine Lifespan: Subaru engines are known for their durability and longevity, with many drivers reporting engines that last well beyond 200,000 miles with proper maintenance. The key to extending the lifespan of your Subaru engine is regular maintenance, including oil changes, fluid checks, and tune-ups.
How much pounds does a transmission weigh?
Most transmissions weigh between 100 and 400 pounds, with an average transmission tipping the scales at 226 pounds. Truck transmissions tend to be heavier, as are automatics, because of their complexity. An automatic transmission weighs 50-75 pounds more than a comparable manual.
How much does a Subaru transmission weight?
It weighs about 7 lbs. Assuming the WRX crossmember assembly weighs about 8 lbs, then: WRX 5MT tranny + pressure plate + clutch disk + TO bearing + flywheel + shift linkage + smallcar adaptor kit = about 193 lbs. Assuming the 4EAT flexplate weighs about 8 lbs, then the 4EAT tranny + TC + flexplate = about 258 lbs.
How much does a Subaru piston weigh?
Technical Specifications
| Make | SUBARU |
|---|---|
| Piston Avg Weight | 391 |
| Pin Wall Thickness | 0.180 |
| Piston Type | Dish |
| Product Market | Sport Compact |
What is the weight of a shaft?
A golf shaft weight varies broadly from around 45 grams in some ultra-light graphite shafts up to 137 grams in steel shafts.
How much does a drive shaft weight?
Steel, of course, is heavier than aluminum or carbon fiber. A 3.5" o.d. shaft made of chrom-moly tips the scales at 20.6 pounds. Aluminum is by far more popular, and M-W's exclusive 7075 alloy driveshafts are 13.7 pounds.
