How much transmission fluid does a 2000 7.3 hold?
The 2000 Ford 7.3L diesel engine uses approximately 12 quarts (3 gallons) of transmission fluid in its automatic transmission. This fluid capacity is for the standard 4R100 automatic transmission found in many Ford trucks and vans equipped with the 7.3L Power Stroke diesel engine.
Detailed Explanation
The 2000 Ford 7.3L Power Stroke diesel engine was a popular option in Ford's lineup of trucks and vans, including the F-150, F-250, F-350, and E-Series vans. These vehicles were equipped with an automatic 4R100 transmission, which required a specific amount of transmission fluid to operate properly.
According to the Ford service manuals and technical specifications, the 4R100 automatic transmission in a 2000 7.3L diesel-powered Ford vehicle holds approximately 12 quarts (3 gallons) of transmission fluid. This fluid capacity is necessary to ensure adequate lubrication and cooling of the transmission components, which are under significant load when towing or hauling heavy payloads.
It's important to use the correct type and amount of transmission fluid specified by Ford for the 4R100 transmission. Using the wrong fluid or an incorrect amount can lead to premature wear, slipping, or even transmission failure. Owners should consult their owner's manual or a qualified mechanic to ensure they are maintaining the transmission fluid level properly.
Transmission Fluid Maintenance
In addition to the initial fill, the transmission fluid in a 2000 7.3L Ford diesel should be changed periodically, typically every 30,000 to 60,000 miles, depending on the vehicle's usage and service conditions. Failure to change the fluid at the recommended intervals can lead to increased wear and reduced transmission lifespan.
- Recommended transmission fluid: Motorcraft MERCON V or equivalent
- Typical fluid change interval: 30,000 to 60,000 miles
- Fluid capacity: Approximately 12 quarts (3 gallons)
Proper maintenance of the transmission fluid is crucial for the long-term reliability and performance of the 4R100 automatic transmission in a 2000 Ford 7.3L diesel-powered vehicle.
How much transmission fluid does a 2000 Ford F250 7.3 hold?
Automatic Transmission Fluid
Capacity: 4 speed 20 Plate OAC 4R100 Total Fill 17 quarts. Capacity: 6.4 quarts Initial Fill.
How much transmission fluid does a 2000 Ford f250 7.3 hold?
Automatic Transmission Fluid
Capacity: 4 speed 20 Plate OAC 4R100 Total Fill 17 quarts. Capacity: 6.4 quarts Initial Fill.
How much transmission fluid does a 1999 Ford f250 7.3 hold?
Automatic Transmission Fluid
Capacity: 4 speed 26 Plate OAC 4R100 Total Fill 17.6 quarts.
How many quarts does a 2000 7.3 take?
15 quarts
Capacity: 15 quarts (with filter). When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase. After refill, check oil level.
How much transmission fluid does a 2000 F350 take?
For Automatic Transmission: 4R100....MA5
| Notes: | (1) This specification has been updated from Mercon to Mercon V per TSB 06-14-4 |
|---|---|
| Capacity: | 6.4 quarts Initial Fill. |
| Capacity: | 4 speed 26 Plate OAC 4R100 Total Fill 17.6 quarts. |
| Capacity: | 4 speed 20 Plate OAC 4R100 Total Fill 17 quarts. |
How much transmission fluid does a 7.3 4R100 hold?
level should be checked when fluid is cold to ensure the fluid level is above the ADD mark or lowest dimple on the dipstick. Once the fluid is above the ADD mark, follow the normal checking procedure. The average dry fill capacity of a 4R100 is between 15.9 and 16.4 quarts.
How many quarts does a 2000 7.3 Powerstroke take?
15 quarts
Capacity: 15 quarts (with filter). When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase.
How much transmission fluid does a 2001 Ford f350 7.3 hold?
17.7 quarts
The manual says it holds 17.7 quarts.
How many quarts of transmission fluid does a 7.3 powerstroke take?
Fluids and Capacities
| 7.3 PSD Fluid Capacities | ||
|---|---|---|
| Oil | Capacity | |
| Transmission Fluid (Manual) | MERCON V Full Synthetic ATF | ZF S5 3.4 quarts ZF S6 5.8 quarts |
| Transfer Case Fluid | Motorcraft XL-12 transfer case fluid | 2.0 quarts |
| Dana 50 Differential Fluid | SAE 80W-90 Gear Oil | 1.9 quarts |
What kind of transmission fluid does a 2000 7.3 powerstroke take?
Note: Only use MERCON® ULV transmission fluid for automatic transmissions that require MERCON® ULV transmission fluid. The use of any other fluid could cause transmission damage. Ten-speed automatic transmission (10R140).
