How much does it cost to replace axles on a Honda?
Replacing a CV axle on a Honda typically costs between 300 and 900 per axle installed, depending on model, parts quality, and labor rates. This article breaks down the typical costs and factors to help you estimate the total.
Axle work usually means replacing the CV axle shaft that runs from the transmission to the wheel. Front-wheel-drive Honda models use CV axles on the front and often on the rear as well in some designs. Costs vary by whether you replace a single axle or both, front vs rear, and whether you choose OEM, OEM-equivalent, or aftermarket parts. Labor rates differ by region and shop, and additional components such as wheel bearings or alignment can add to the bill. The guide below summarizes typical ranges as of 2024–2025.
Cost ranges by scenario
Prices depend on which axle(s) you replace and whether you replace one side or both.
Single axle replacement (front or rear)
- Front CV axle replacement (one side): typically 300–900 installed
- Rear CV axle replacement (one side): typically 350–900 installed
Conclusion: Replacing a single CV axle usually lands in the low-to-mid hundreds, with front axles often on the higher end due to hub and bearing factors in some models.
Both axles replacement (front pair or rear pair)
- Front axle pair (both sides): typically 600–1800 installed
- Rear axle pair (both sides): typically 700–1500 installed
Conclusion: Replacing both sides doubles the parts and labor, pushing total costs into the mid-thousand range in many markets, especially with OEM parts.
What drives the price
Several factors influence the final bill beyond axle count.
- Parts quality and supplier: OEM/original equipment manufacturer versus aftermarket or remanufactured assemblies vary widely in price and warranty.
- Labor time and regional rates: Shops bill by hour; rates can differ substantially by city and state.
- Vehicle model and drivetrain specifics: Some Honda models have more complex hub assemblies or require additional hardware, increasing labor and part costs.
- Additional components or services: Wheel bearings, seals, axle nuts, or wheel alignment can add to the total.
Conclusion: Expect the estimate to itemize parts, labor, and any required ancillary work so you can compare apples to apples.
Tips to save on replacement costs
Practical steps to reduce expenses without compromising safety.
- Compare quotes from dealers and independent shops; ask about warranties.
- Ask for itemized estimates showing part type (OEM vs aftermarket) and labor hours.
- Consider aftermarket or remanufactured axles if reliability and warranty are solid; ensure compatibility with your Honda’s model and year.
- Bundle services where possible (alignment, tire rotation) to minimize repetitive labor charges.
Conclusion: A careful comparison and understanding of parts and labor can lead to substantial savings while maintaining safe operation.
Summary
For most Honda owners, a single CV axle replacement falls roughly in the 300–900 range, with both-sides jobs climbing to 600–1800 or more, depending on model, parts choice, and labor rate. Always obtain an itemized estimate that includes parts, labor, and any related services, and consider the value of warranties when choosing OEM versus aftermarket components.
