How do I turn off ACC on my Honda Passport?
To disable Adaptive Cruise Control (ACC) on a Honda Passport, cancel or switch Honda Sensing off using the steering wheel controls or the MAIN switch; ACC will stop maintaining speed and following distance until you re-enable it.
What ACC does in the Passport
Adaptive Cruise Control is part of Honda Sensing that automatically maintains a set speed and a safe following distance from the vehicle ahead. When engaged, you set a cruising speed and a following gap; the system adjusts throttle and braking to maintain that distance. It can help with highway driving but requires the driver to stay attentive and ready to take control.
Ways to turn off ACC
Use one of these methods depending on whether you want a temporary cancellation or a complete disable of Honda Sensing/ACC. The Passport uses a steering wheel-mounted MAIN switch to enable or disable the system; turning it off will disable ACC until you turn it back on.
- Press the CANCEL button on the steering wheel to temporarily stop ACC while leaving the system ready to resume.
- Push or lightly tap the brake pedal to disengage ACC immediately.
- Use the MAIN switch to OFF to completely disable Honda Sensing and ACC. To re-enable, press MAIN again to ON and then engage Cruise Control as needed.
Disabling ACC via the MAIN switch affects both ACC and other Honda Sensing features; cancellation preserves the system’s readiness to resume automatically when conditions allow.
Temporary cancellation
Temporary cancellation via CANCEL or a brake tap is useful when you want manual control for a period. The system stays available to resume when you press RES/SET or accelerate to the desired speed, depending on how your Passport is configured.
Permanently disable
Turning the MAIN switch to OFF completely disables Honda Sensing / ACC until you turn it back ON. This is a more permanent change for the current drive session, and you’ll need to re-activate the system to use ACC again.
Re-enabling ACC
To re-enable ACC, switch the MAIN control to ON. Then press the CRUISE control (or RES/SET, depending on your trim) to engage a set speed and resume ACC operation. You may need to select a following distance/gap setting again if your model allows it.
Model-year notes
Most Honda Passport models from 2019 onward pair ACC with Honda Sensing under a single system. Button labels and exact behavior can vary slightly by trim and year, but the core methods—CANCEL, brake deactivation, and MAIN switch OFF/ON—remain consistent. If you’re unsure, check your owner’s manual for your specific year and trim, as some late-year updates adjust response timing or available following-distance options.
Safety reminders
Adaptive Cruise Control is a convenience feature designed to reduce driver workload, not a substitute for active driving. Always keep your hands on the wheel and be prepared to take full control if conditions demand it, especially in heavy traffic, construction zones, or adverse weather.
Summary
To turn off ACC on a Honda Passport, cancel with the steering wheel control, briefly brake to disengage, or switch the MAIN control to OFF for a full disable. Re-enable by returning MAIN to ON and reactivating Cruise Control. Always drive attentively and be ready to take over at any moment.
How do I get my Honda Passport out of accessory mode?
Accessory or On mode: Press ENGINE START/STOP once without pressing the brake pedal for Accessory mode. Press it again for On mode. Starting the engine: Press and hold the brake pedal, then press ENGINE START/STOP. Keep your foot firmly on the brake pedal when starting the engine.
Can I turn off adaptive cruise control on my Honda?
Yes, you can turn off adaptive cruise control on a Honda by pressing the CANCEL button, tapping the cruise control button on the steering wheel, or by pressing the brake pedal. To switch to standard cruise control, press and hold the distance/interval button on the steering wheel until the ACC icon disappears and the standard cruise control icon appears.
To disable adaptive cruise control completely:
- Press the CANCEL button: This will cancel the current cruise control session.
- Press the brake pedal: This will immediately disengage the system and cancel the session.
- Press the cruise control "OFF" button: This turns the entire cruise control system off, and the indicator light will go out.
To switch to standard cruise control:
- Press and hold the distance/interval button: This is the button with a car icon and a few lines, usually located on the steering wheel.
- Look for the change: The on-screen indicator will change from showing the car icon (adaptive mode) to a simple speedometer and arrow icon (standard mode).
- Note: You may have to disable ACC first by holding the button, then reactivate cruise control with the main button before you can set a new speed.
This video demonstrates how to switch between adaptive and standard cruise control on a Honda Civic: 51sCrazy Honda ChrisYouTube · Sep 16, 2024
How do I turn off my ACC on my Honda Passport?
How Do You Turn Off the ACC Completely?
- Press on the brakes. This automatically disengages the ACC feature.
- Press the “Cancel” button on the steering wheel.
- Press the ACC icon on the steering wheel.
Can ACC be turned off?
Adaptive Cruise Control (ACC2) can be deactivated and switched off. button on the steering wheel (2). The symbol and indicators are extinguished – Adaptive Cruise Control is set in standby mode.
