How much engine oil does a Dodge Caliber take?
The Dodge Caliber typically requires about 4.5 quarts (4.3 liters) of engine oil with a new filter for the 2.0-liter engine, and about 5.5 quarts (5.2 liters) with a new filter for the 2.4-liter engine.
Oil capacity varies by engine type and model year, so check the specific specification for your Caliber’s engine and VIN in the owner’s manual or service guide. The following details break down the common capacities and offer practical guidance for a safe, accurate oil change.
Engine options and oil capacity
Below are typical capacities for a full oil change with a new filter, which is the standard reference when you’re planning maintenance.
- 2.0-liter World engine: 4.5 quarts (4.3 L) of engine oil with a new filter
- 2.4-liter World engine: 5.5 quarts (5.2 L) of engine oil with a new filter
These figures assume a complete oil and filter change. If you’re topping off rather than performing a full change, you’ll need less oil to reach the proper level on the dipstick.
Oil type and change guidance
Oil viscosity and specifications can vary by year and climate. Always follow the viscosity recommendation in your owner’s manual, and use a high-quality oil that meets API/SN or newer standards.
- Follow the manufacturer’s viscosity recommendation for your exact year and engine; common choices include 5W-20 or 5W-30 depending on climate and model year. Verify the specification in the manual or with a dealership.
- Use a new oil filter during every change and check the oil level with the dipstick once the engine has reached operating temperature and the oil has settled.
Concluding note: Start with the full-change quantities listed above, then adjust if your dipstick shows you’re under or over the target level after the oil has warmed and circulated.
Summary
In brief, the Dodge Caliber’s oil capacity depends on the engine: about 4.5 quarts for the 2.0L and about 5.5 quarts for the 2.4L, with a new filter included in the calculation. Always confirm exact values for your year and VIN in the owner’s manual, use the recommended viscosity, and verify the level after an oil change. This ensures proper lubrication and engine longevity.
How many quarts of oil does a 3.6 L Chrysler engine take?
The oil capacity for a Chrysler 3.6L engine is typically 5 to 6 quarts, depending on the specific model, but the exact amount can vary. For example, the 3.6L Pentastar "Upgrade" engine requires about 5 quarts, while other models like a 2019 Chrysler 300 can take up to 5.9 quarts with a filter change. Always check your owner's manual for the precise capacity for your vehicle and remember to check the dipstick after refilling.
Oil capacity by model (approximate)
- Chrysler Voyager (2024): 5 quarts
- Chrysler 300 (2019): 5.9 quarts
- Chrysler Pacifica (2020): 5.3 quarts
- Chrysler Town and Country (2016): 5.5 quarts
Important considerations
- Check the dipstick: Always check the oil level with the dipstick after refilling to ensure it's at the correct level.
- Consult your owner's manual: The most accurate information for your specific vehicle will be in your owner's manual.
- Pentastar upgrade engine: Some newer models with the "Upgrade" version of the 3.6L engine have an oil capacity of approximately 5 quarts.
What kind of oil does a 2010 Dodge Caliber take?
Mobil 1 Full Synthetic Engine Oil 5W-20 5 Quart.
How many quarts of oil does a 4.6 L engine take?
The oil capacity for a 4.6L Ford engine is typically 6 quarts with a filter change, though older models may have initially been specified for 5 quarts. Ford later updated the recommendation to 6 quarts for many vehicles to prevent oil starvation, and it's important to always check the dipstick after refilling to ensure the correct level.
- Standard capacity: 6 quarts with a filter change.
- Older models: Some older models were originally listed with a 5-quart capacity, but a 6-quart fill is often recommended now, particularly starting around the 2002 model year.
- Always check the dipstick: After adding the new oil, run the engine briefly, then check the dipstick on a level surface to confirm the oil level is correct and to avoid overfilling.
How many quarts of oil does a Dodge Caliber take?
The oil capacity for a Dodge Caliber is 4.5 US quarts (4.34.34.3 liters) for the 2.0L engine and 4.7 US quarts (4.44.44.4 liters) for the 2.4L engine, both with a filter change. The recommended oil viscosity is typically 5W-20 for the 2.0L and 0W-40 or 5W-20 for the 2.4L, but always check your owner's manual to be sure.
| Engine Size | Oil Capacity (with filter) | Recommended Viscosity |
|---|---|---|
| 2.0L | 4.5 US quarts (4.34.34.3 L) | 5W-20 |
| 2.4L | 4.7 US quarts (4.44.44.4 L) | 0W-40 or 5W-20 |
(this||self).Wufxzb=function(c,e,f,l,k){var d=document.getElementById(c);if(d&&(d.offsetWidth!==0||d.offsetHeight!==0)){c=d.querySelector("div");var g=c.scrollWidth-c.offsetWidth,h=Math.min(e?g:0,g);c.scrollLeft=e&&(l||f)?0:h;var a=d.getElementsByTagName("g-left-button")[0],b=d.getElementsByTagName("g-right-button")[0];a&&b&&(e=RegExp("\\btHT0l\\b"),f=RegExp("\\bpQXcHc\\b"),a.className=a.className.replace(e,""),b.className=b.className.replace(e,""),h===0?a.className="pQXcHc "+a.className:(a.className=
a.className.replace(f,""),k&&c.classList.add("pA30Ne")),h===g?b.className="pQXcHc "+b.className:(b.className=b.className.replace(f,""),k&&c.classList.add("FpCCub")),setTimeout(function(){a.className+=" tHT0l";b.className+=" tHT0l"},50))}};}).call(this);(function(){var id='_ss4lacXXFb-LkdUPoKbQ-Aw_301';var rtl=false;var gecko=false;var edge=false;var soh=false;
(this||self).Wufxzb(id,rtl,gecko,edge,soh);})();
