How much fluid does a 2007 4L60E take?
The 2007 4L60E transmission, a popular automatic transmission used in various General Motors vehicles, requires a specific amount of fluid to function properly. According to the information gathered from reliable sources, the 2007 4L60E transmission typically takes around 5 to 6 quarts of transmission fluid.
Detailed Explanation
The 4L60E transmission is a four-speed, electronically controlled automatic transmission that was widely used in GM vehicles, including the Chevrolet Silverado, Tahoe, and Suburban, as well as the GMC Sierra and Yukon, during the 2007 model year. This transmission is known for its durability and reliability, but it does require regular maintenance, including the replacement of the transmission fluid.
The recommended fluid capacity for a 2007 4L60E transmission is typically between 5 and 6 quarts, depending on the specific vehicle and any modifications or additions to the transmission system. This fluid capacity is essential for ensuring proper lubrication and cooling of the transmission components, which helps to prevent premature wear and tear.
- The 2007 4L60E transmission is designed to use a specific type of transmission fluid, typically a Dexron-VI or a compatible synthetic fluid.
- It's important to use the recommended fluid type and to change the fluid at the intervals specified by the vehicle manufacturer to maintain the transmission's performance and longevity.
- Overfilling or underfilling the transmission can lead to various issues, such as leaks, reduced efficiency, and even damage to the internal components.
Proper maintenance and attention to the transmission fluid level are crucial for ensuring the smooth and reliable operation of a 2007 4L60E transmission. By following the manufacturer's recommendations and using the correct fluid type and quantity, vehicle owners can help to extend the life of this important component of their GM vehicle.
How many quarts of transmission fluid do I need for a 2007 Chevy Silverado?
Transmission Fluid Change
| Automatic transmission fluid type | |
|---|---|
| From dry, including torque converter | |
| 4L60-E/4L65-E | 11.2 quarts |
| 4L80-E/4L85-E | 13.5 quarts |
| Manual transmission lube capacity |
What type of transmission fluid for a 2007 Chevy Suburban?
Dexron VI Automatic Transmission Fluid
FRAM – Full Synthetic Dexron VI Automatic Transmission Fluid: 1 Quart (Part No. F426)
How much transmission fluid does a 4L60E need?
The 4L60E transmission typically requires approximately 12 quarts of transmission fluid for a new installation, while a fluid change usually requires around 5 quarts of fluid.
How much transmission fluid does a 5.3 Chevy take?
Automatic Transmission Fluid
Capacity: 6 quarts Initial Fill.
What is the best transmission fluid for a 4L60E?
Dex VI will be a great choice, but the standard D/M fluids will work fine too. It's really your choice. Mixing them won't do any harm, though Dex VI may clean marginally better.
What fluid does a 2007 4L60E take?
You can run a Dex VI specific fluid, run a Dex III specific fluid, or run a multi purpose tranny fluid that covers Dex III. ANY of those will work.
How many quarts does a 2007 5.3 take?
6 quarts
Capacity: 6 quarts (with filter). After refill check oil level.
How many quarts does a 5.3 L take?
eight quarts
5.3L V8: eight quarts with oil filter.
Do I fill the torque converter before installing?
But you you put it in the transmission. First. And it's good practice to fill that up as much as you can. Sometimes you can get quite a bit of fluid in there. So you fill it up let the bubbles.
What happens if you overfill transmission fluid?
Excessive fluid prohibits proper lubrication and cooling and slows the rotating crankshaft, similar to the effect of running through water. When the air above mixes with the high levels of fluid, it creates a foamy substance that saturates the transmission. This can lead to: Part pitting.
