How much fluid does a Dodge Ram 3500 transfer case hold?
The Dodge Ram 3500 transfer case typically holds between 1.5 to 2 quarts of fluid, depending on the specific model and year of the vehicle. The transfer case is a critical component in four-wheel-drive and all-wheel-drive systems, responsible for distributing power from the transmission to the front and rear axles.
Understanding the Dodge Ram 3500 Transfer Case
The Dodge Ram 3500 is a heavy-duty pickup truck known for its impressive towing and hauling capabilities. The transfer case is a key part of the vehicle's four-wheel-drive system, allowing the driver to engage the front axle and distribute power to all four wheels when needed.
The transfer case fluid serves several important functions, including:
- Lubricating the gears and bearings within the transfer case to reduce wear and tear
- Helping to dissipate heat generated during operation
- Maintaining the proper viscosity for smooth power transfer
Regularly checking and changing the transfer case fluid, as recommended by the manufacturer, is essential for the long-term health and performance of the four-wheel-drive system.
Fluid Capacity Specifics
The exact fluid capacity for the Dodge Ram 3500 transfer case can vary depending on the model year and specific configuration of the vehicle. Here are some general guidelines:
- Dodge Ram 3500 models with the NV271 transfer case typically hold 1.5 quarts of fluid.
- Dodge Ram 3500 models with the NV273 transfer case typically hold 2 quarts of fluid.
- It's important to consult your owner's manual or contact a Dodge dealer to determine the exact fluid capacity for your specific Dodge Ram 3500 model.
Properly maintaining the transfer case fluid is crucial for the long-term performance and reliability of your Dodge Ram 3500's four-wheel-drive system. Be sure to follow the manufacturer's recommended service intervals and use the correct type of fluid to ensure optimal operation.
Does the transmission and transfer case use the same fluid?
Both fluids serve as cooling lubricants for their respective systems. However, the two lubricants are different. While some transfer cases use automatic transmission fluid instead of dedicated transfer case fluid, the two are generally not interchangeable.
How much fluid does a Dodge Ram 3500 differential hold?
capacity 2.5 liters, 2.6 quarts.) Rear Differential - Qty 4 to 6 Synthetic Ravenol Gear Oil SLS 75W-140 GL-5 Limited Slip 1 Liter.
How many quarts does a 6.7 Cummins transmission take?
Since it is a cummins it will have the 47RE transmission. If you are just doing a service (drain/fill replace filter) it will take 4.0 quarts. The total fluid capacity (including the torque converter) is 16.9 quarts.
How much fluid does a 2016 Ram 3500 transfer case hold?
What Fluid Does My Dodge or Ram Transfer Case Take?
| Year Range | Model | Capacity |
|---|---|---|
| 2011-2015 | Ram 1500 | 3.0 Pints |
| 2012-2018 | Ram 1500 | 3.0 Pints |
| 2012-2018 | Ram 2500, Ram 3500 | 3.8 Pints |
| 2012-2018 | Ram 4500, Ram 5500 | 3.8 Pints |
What kind of rear differential fluid does a 2017 Ram 3500 take?
Differential Lubricant: Rear
11.5 AA With O LSD Rear 8.9 pints.
What oil goes in a Dodge Ram transfer case?
Ram recommends the use of a licensed ATF+4® MS-9602 specification fluid for the NV241, NV243, NV244, NV271, and NV273 type transfer case fluid change. This is an ATF for the transfer case.
What fluid should I run in my transfer case?
Most transfer cases are filled with an automatic transmission fluid, which is usually red in colour. Others use a thicker gear oil, and some use a specialized fluid that is specifically made just for that transfer case.
How much fluid does a Ram 3500 transfer case hold?
What Fluid Does My Dodge or Ram Transfer Case Take?
| Year Range | Model | Capacity |
|---|---|---|
| 2001-2015 | Dakota (to 11), Durango | 3.4 Pints |
| 2002-2008 | Ram 1500 | 3.4 Pints |
| 2002-2012 | Ram 1500 | 3.4 Pints |
| 2003-2012 | Ram 2500, Ram 3500 | 4.0 Pints |
How many quarts of transmission fluid does a Ram 3500 take?
Automatic Transmission Fluid
Capacity: 7.2 quarts Initial Fill. Capacity: 6 speed AS69RC Total Fill 13.7 quarts.
How many quarts of fluid do I need for a transfer case?
Transfer Case Fluid Capacity and Specification (If Equipped)
| Variant | Quantity |
|---|---|
| All. | 1.9 qt (1.8 L) |
