How much horsepower does a 1953 Ford Jubilee tractor have?
Approximately 34 horsepower at the engine (flywheel rating), with about 26–28 horsepower usable at the drawbar.
The 1953 Ford Jubilee was the first of Ford’s N-series lineage, launched during a period when horsepower figures were published in several different ways. Engine power (the power at the flywheel) is higher than the power actually usable by implements pulled through the drivetrain, which is limited by transmission, axle losses, and hydraulics. Restored and well-tuned examples can vary slightly from brochure-stated figures, but the numbers below reflect common industry references for the Jubilee.
Key horsepower figures
Below are the commonly cited ratings for the Jubilee depending on the measurement standard.
- Engine horsepower (flywheel/SAE gross): about 34 HP
- Drawbar horsepower: about 26–28 HP
These figures illustrate the distinction between engine output and usable power at ground level. Real-world performance can vary based on condition, gearing, and operating equipment.
What these numbers mean in practice
Engine horsepower describes the raw power produced by the engine. Drawbar horsepower represents the practical power available for towing and pulling implements, after drivetrain losses. In everyday use, the Jubilee’s output was well-suited for typical mid-20th-century farm tasks such as plowing, harrowing, and light loader work when paired with appropriate attachments.
Historical context and comparisons
Across Ford’s era, the Jubilee sat in a mid-range power category for a utility tractor of its time. While newer models gradually surpassed it, the Jubilee was celebrated for its reliability, hydraulics, and the introduction of the modern N-series design philosophy. When evaluating a specific 1953 Jubilee today, owners and collectors often cite the engine’s nominal rating alongside the drawbar figure to gauge performance potential with vintage implements.
Summary
The 1953 Ford Jubilee typically delivers about 34 HP at the engine and around 26–28 HP at the drawbar. Variations can occur due to testing standards, year of production, and the tractor’s condition. Always check the specific tractor’s brochure or nameplate for exact figures.
How much horsepower does a 1954 Ford Jubilee have?
It features a 2.2L 4-cylinder gasoline engine, claiming 20.2 hp at the drawbar and 30.15 hp at the PTO, with tested outputs of 26.8 hp drawbar and 31.14 hp belt. The tractor was offered at an original price of $1,560 in 1954.
How much is a 1953 Ford Golden Jubilee worth?
There are 30 comps for this 1953 Ford Naa Golden Jubilee Tractor indicating a price range from $4,465 - $8,437 .
How many horsepower is a 1953 Ford Jubilee tractor?
32 hp
overhead-valve, gasoline inline four-cylinder engine outputting 32 hp. A four-speed transmission was standard on the NAA.
How much horsepower does a Ford Jubilee tractor have?
The Ford Jubilee (NAA) has an advertised horsepower of approximately 30 to 32 hp, depending on the source and how it's measured. It features a 2.2L (134 cubic inch) overhead-valve gasoline engine that produced around 20.2 hp at the drawbar and 30.15 hp at the Power Take-Off (PTO) under ideal conditions, with tested results showing slightly higher figures.
- Engine: The "Red Tiger" engine was a significant upgrade from the previous models, with overhead valves providing more power.
- Drawbar Horsepower: Advertised as approximately 20.2 hp, with tested real-world performance closer to 26.8 hp.
- PTO Horsepower: Advertised as approximately 30.15 hp, with tested performance of 31.14 hp.
- Belt Horsepower: Tested at 31.14 hp.
