Loading

How much horsepower does a 1982 Ford Bronco have?

The 1982 Ford Bronco was a rugged and capable off-road vehicle that was known for its impressive power and performance. But just how much horsepower did this iconic SUV pack under the hood? Let's dive into the details.


The Engine Specifications of the 1982 Ford Bronco


The 1982 Ford Bronco was available with a few different engine options, but the most powerful of these was the 5.8-liter V8 engine. This V8 engine was capable of producing 150 horsepower and 265 lb-ft of torque.


To put this into perspective, the 1982 Bronco's V8 engine was significantly more powerful than the standard 4.9-liter inline-six engine, which produced only 115 horsepower and 210 lb-ft of torque.


How the Bronco's Horsepower Compared to Other SUVs of the Era


When compared to other SUVs of the early 1980s, the 1982 Ford Bronco's 150-horsepower V8 engine was quite impressive. For example, the 1982 Chevrolet Blazer's largest available engine was a 5.0-liter V8 that produced only 140 horsepower.


The Bronco's power also compared favorably to the 1982 Jeep CJ-7, which had a 4.2-liter inline-six engine that generated just 112 horsepower.


So in terms of raw power, the 1982 Ford Bronco stood out as one of the more powerful SUVs on the market at the time.


The Bronco's Horsepower and Off-Road Capability


The 150 horsepower produced by the Bronco's V8 engine, combined with its rugged four-wheel-drive system, made it a highly capable off-road vehicle. The Bronco's power and torque allowed it to easily climb hills, traverse rough terrain, and tow heavy loads.


This off-road prowess, along with the Bronco's distinctive styling and spacious interior, helped make it a popular choice among outdoor enthusiasts and adventurers in the 1980s.


Conclusion


In summary, the 1982 Ford Bronco was powered by a potent 5.8-liter V8 engine that produced 150 horsepower and 265 lb-ft of torque. This engine gave the Bronco impressive power and performance, especially compared to other SUVs of the era. The Bronco's combination of power and off-road capability made it a beloved choice among those seeking a capable and versatile 4x4 vehicle.

Did the original Bronco have a V8?


First Generation Ford Bronco
Over the course of this first generation, engine size increased dramatically from a 170 cubic inch inline six-cylinder engine to a 302 cubic inch V8 engine.



How much horsepower does a 1982 Mustang 302 have?


This new high-output 302 cubic-inch V-8 (also dubbed the 5.0 Windsor) came with an overhead valve and dual carburetor setup. While 157 horsepower and 240 lb-ft of torque are mild by today's standards, this small-block Ford put some needed oomph in the Mustang's engine bay.



What Bronco has 400 hp?


VelociRaptor 400
In the above video, the VelociRaptor 400 undergoes rigorous chassis dyno pulls, where its horsepower and torque output are measured and recorded. The upgraded Ford Bronco produces an incredible 400+ horsepower and 503 lb-ft of torque, making it one of the most powerful Ford Broncos ever built.



How much horsepower does a 1980 Ford Bronco have?


Horsepower: 117 hp @ 3,400 rpm. Torque: 223 lb-ft @ 1,600 rpm.



Why are old Broncos so expensive?


First off, it's important to understand that an old Ford Bronco can cost anywhere from a few thousand dollars to well over $100,000. Some of the key factors that determine the price are the condition of the vehicle, its rarity, and its overall desirability.



What year Bronco is most desirable?


1977
Out of all the years of the first-generation Bronco, 1977 is widely considered to be the best year although anything from 74 is not only sought after, but more widely available.



How much is an 80s Bronco worth?


The value of a 1980 Ford Bronco Ranger XLT can vary greatly depending on its condition, mileage, options, and history. Typically, you can expect to pay around $22,733 for a 1980 Ford Bronco Ranger XLT in good condition with average spec.



What engine came with a 1982 Ford Bronco?


FORD Bronco 5.8L V8 4MT AWD (156 HP)

ENGINE SPECS - 5.8L V8 4MT AWD (156 HP)
Power:114.7 KW @ 4000 RPM 156 HP @ 4000 RPM 154 BHP @ 4000 RPM
Fuel System:Carburetor
Fuel:Gasoline
Fuel capacity:25.1 gallons (95.0 L)



What is the most powerful engine in the Ford Bronco?


A more aggressive style, an arsenal of off-road features and a power-packed 3.0-liter EcoBoost® V-6 engine will check all the boxes for Tampa-area drivers who love power and performance. With the 3.0-liter EcoBoost® V-6 under the hood, the Ford Bronco Raptor will produce 418 horsepower and 440 pound-feet of torque.



What is a 1982 Ford Bronco worth?


Typically, you can expect to pay around $18,367 for a 1982 Ford Bronco XLT Lariat in good condition with average spec.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.