How much horsepower does a 1986 Conquest TSi have?
The 1986 Plymouth Conquest TSi delivered roughly 165 horsepower in its North American, stock configuration, with real-world figures often seen in the mid‑130s to mid‑160s depending on market, emissions equipment, and boost settings. In short: about 150–165 hp for most stock US-spec cars, with some variation by region and year.
To understand the question in full, the Conquest TSi was the turbocharged version of Chrysler’s Starion‑based lineup, built under license from Mitsubishi. Power figures across markets were influenced by testing standards (SAE vs DIN), turbo boost targets, exhaust and emission controls, and model-year revisions. As a result, you may see modest differences between the US, European, and Japanese specifications for the same basic engine family.
What powered the Conquest TSi
The Conquest TSi relied on a turbocharged inline‑four engine derived from Mitsubishi’s small‑displacement turbo family. In 1986, this powerplant delivered performance in the range commonly associated with 1980s turbocharged imports: strong mid‑range torque and horsepower that varied by market and configuration. The result was a car that offered brisk acceleration by the standards of the era, but with ratings that could shift a bit depending on local tuning and emissions equipment.
horsepower figures by market and standard
Because official ratings depended on testing standards and regional specifications, buyers and enthusiasts often cite slightly different numbers for the same model. In the United States, the Conquest TSi was typically listed around the mid‑150s horsepower in stock form, with some markets recording closer to 165 hp. European and other markets sometimes reported figures in the upper 150s to around 170 hp when measured under their respective standards. As with many turbocharged classics, real‑world output can also vary with boost pressure, intercooler presence, and wear.
What this means for collectors and drivers
For collectors, the exact horsepower of a given 1986 Conquest TSi can depend on its specific market documentation, whether it left the factory with the intercooler, and how its emission controls were set for that region. If you’re evaluating a particular car, the best source is the original build sheet or a verified dyno run from that exact vehicle, since numbers vintage cars wear can drift with time and maintenance.
Summary
The 1986 Conquest TSi sits in the era’s typical turbocharged performance band: roughly 150–165 horsepower in stock North American form, with regional variations pushing numbers toward the upper end in some markets. For any individual car, check the original specs and, if possible, a current dyno to confirm its present output. This reflects the broader reality of 1980s turbo import performance: strong, flexible power that depended as much on the market and calibration as on the engine alone.
How much horsepower does a 1986 AE86 have?
It had a maximum gross output of 130 PS (128 hp; 96 kW) and 149 N⋅m (110 lb⋅ft) of torque in standard form, The 4A-GEU engines used in the Japanese market AE86 were also equipped with Denso electronic port fuel injection, T-VIS variable intake geometry and manifold absolute pressure (MAP) sensor.
How much horsepower does a 1986 Buick Regal T Type have?
235 horsepower
1986 Buick T-Type🔥 The 1986 Buick Regal T-Type is a high-performance variant of the Regal. Powered by a 3.8L turbocharged V6 engine, producing 235 horsepower. Its sport-tuned suspension, unique exterior styling, and luxurious interior made it a standout in the mid-80s.
How much horsepower does a conquest TSi have?
The Chrysler Conquest TSi's horsepower varies by model year, but it typically ranged from 176 hp to 188 hp. The 1986 model produced around 176 hp, while later models like the 1988 and 1989 versions produced 188 hp, thanks to upgrades like an intercooler and an updated engine control unit (ECU).
You can watch this video for a review and test drive of the 1988 Chrysler Conquest TSi: 49sRegular Car ReviewsYouTube · Sep 22, 2014
- 1986 models: ~176 horsepower
- 1988 and later models: 188 horsepower
This video shows a test drive of a Chrysler Conquest TSi: 1mDaveKnowsCarsYouTube · Jun 23, 2023
- The engine is a 2.6-liter turbocharged inline-four.
- The horsepower increase was due to engine upgrades, including a more advanced intercooler and an updated ECU.
How much horsepower does a 1987 Conquest TSi have?
about 176 horsepower
The 2.6 Liter Turbocharged engine found in the TSi produced about 176 horsepower, along with a bit of turbo lag in the process. The car you see here is a Plymouth Conquest TSi finished in Black over a Black interior, and currently showing approximately 81,945 miles on the mechanical odometer.
