What size are the lug nuts on a 17 Ford Explorer?
The lug nuts on a stock 2017 Ford Explorer are metric M12 x 1.5 with a 60-degree conical seat, tightened with a 19 mm socket. Always torque to the official specification for your vehicle.
In practice, most 2017 Explorers use five lug nuts per wheel and factory wheels that match a standard conical-seat design. However, wheel packages and aftermarket setups can vary, so it’s important to confirm exact specs for your particular wheels by checking the owner’s manual or the wheel manufacturer’s documentation.
Stock configuration: lug nut specs
Stock wheel setups follow a common standard, but it helps to see the exact details before you work on them.
- Thread size: M12 x 1.5 (metric)
- Seat type: 60-degree conical seat
- Nut hex size (socket): 19 mm
- Number of lug nuts per wheel: 5
These specifications cover the typical factory configuration for most 2017 Explorers. Variations can occur with different trim levels or optional wheels.
Aftermarket considerations
If your Explorer wears aftermarket wheels or a non-standard wheel kit, the lug nuts may differ. It’s essential to verify compatibility with the wheel manufacturer and ensure you’re using the correct socket size and seat type.
- Possible changes in thread size or seat type with aftermarket wheels
- Potential need for different lug nut shapes or seat types (e.g., ball seat vs conical)
- Always match lug nuts to the wheel’s requirements and follow the recommended torque
In most cases, many aftermarket wheels still rely on M12 x 1.5 with a 60-degree conical seat, but always confirm before purchasing or installing to avoid cross-threading or improper seating.
Summary
For a 2017 Ford Explorer, the typical lug nut size is M12 x 1.5 with a 60-degree conical seat, using a 19 mm socket, and five per wheel. Check your owner’s manual or wheel manufacturer to confirm if your wheels are factory-spec or aftermarket, and always torque to the recommended specification for your setup.
