How much horsepower does a 1988 Ford Bronco 2 have?
The 1988 Ford Bronco 2 had a standard engine that produced 115 horsepower. This compact SUV was powered by a 2.9-liter V6 engine that provided adequate power for its size and weight.
Engine Specifications
The 1988 Ford Bronco 2 was equipped with a 2.9-liter Cologne V6 engine as the standard powertrain. This engine had the following key specifications:
- Displacement: 2.9 liters (177 cubic inches)
- Horsepower: 115 hp @ 4,600 rpm
- Torque: 154 lb-ft @ 2,800 rpm
- Fuel system: Throttle-body fuel injection
- Transmission: 5-speed manual or 4-speed automatic
The Bronco 2's V6 engine provided adequate power for its compact size and weight, allowing for decent acceleration and towing capacity. However, it was not considered a high-performance engine compared to the larger V8 options available in other SUVs at the time.
Comparison to Competitors
When compared to other compact SUVs of the era, the 1988 Ford Bronco 2's 115 horsepower engine was on the lower end of the spectrum. For example, the 1988 Chevrolet S-10 Blazer had a standard 2.8-liter V6 engine that produced 125 horsepower, while the 1988 Jeep Cherokee had a 2.5-liter four-cylinder engine with 117 horsepower.
Despite the relatively modest power output, the Bronco 2 remained a popular choice for buyers seeking a capable and affordable compact SUV in the late 1980s.
What transmission is in a 1988 Ford Bronco 2?
| Ford Bronco II | |
|---|---|
| Transmission | Manual: 4-speed Mazda TK4 5-speed Mazda TK5 5-speed Mazda M5OD-R1 5-speed Mitsubishi FM145 5-speed Mitsubishi FM146 Automatic: 3-speed C5 4-speed A4LD |
| Dimensions | |
| Wheelbase | 94.0 in (2,388 mm) |
| Length | 1983–1988: 158.3 in (4,021 mm) 1989–1990: 161.9 in (4,112 mm) |
How much is a 1988 Ford Bronco worth?
The value of a 1988 Ford Bronco Custom can vary greatly depending on its condition, mileage, options, and history. Typically, you can expect to pay around $14,667 for a 1988 Ford Bronco Custom in good condition with average spec.
How much horsepower does a 1986 Ford Bronco 2 have?
140 hp
The 1986 model year introduced the 140 hp (104 kW) fuel injected 2.9 L Cologne V6 engine. A Mitsubishi 4-cylinder 2.3 L turbodiesel was optional during the 1986 & 1987 model years; however it delivered poor performance and had low sales.
What is a Bronco 2 worth?
Q: What is the average sale price of a Ford Bronco II? A: The average price of a Ford Bronco II is $11,789. Q: What years was the Ford Bronco II sold? A: The Ford Bronco II was sold for model years 1984 to 1990.
Did the Bronco 2 come with a V8?
Two different V8 engines were offered for the second generation Bronco: the 5.8L 351M and the 6.6L 400. While offering virtually the same horsepower output, the 400 produced a higher torque output over the 351M. As the 460 V8 was restricted to rear-wheel drive F-Series trucks, it was not offered in the Bronco.
How much horsepower does the Ford Bronco 2 have?
The result was that the Bronco II went from 115 to 140 horsepower.
Can you put a V8 in a Bronco 2?
The original Bronco II and Ranger transmissions are too weak to withstand V8 power and must be swapped for a heavier duty transmission. You have the option of changing your Manual truck to an automatic, or vice versa at this point.
What year Bronco is most desirable?
1977
Out of all the years of the first-generation Bronco, 1977 is widely considered to be the best year although anything from 74 is not only sought after, but more widely available.
What engine did the 1988 Ford Bronco have?
The New Shape of Adventure
The 300 six and 351W 5.8L V8 engines were paired with electronic fuel injection in the 1987-88 model years. A 5-speed manual transmission was introduced in 1988 and an all-new Borg Warner 1345 transfer case with optional Touch Drive electric shift replaced the New Process 208 case.
How much horsepower does a 1988 Ford Bronco II have?
140-horsepower
control valve to selectively modulate rear brake line hydraulic pressure. The result is enhanced driver ability to con- trol braking performance (see illustration). All Bronco IIs feature the 2.9 liter V-6 engine with its 140-horsepower output.
