How much horsepower does a 1988 Toyota Pickup 22R have?
Approximately 95 horsepower for the carbureted 22R version and about 105 horsepower for the fuel-injected 22R-E variant, depending on the exact specification for a given truck.
Engine Variants and Power Output
In the 1988 Toyota Pickup lineup, power largely depended on which 2.4-liter four-cylinder engine was installed. The early carbureted 22R engine and the later fuel-injected 22R-E variant produced different horsepower figures that reflected technology and regulatory changes of the era.
Key horsepower figures by engine variant:
- Carbureted 22R: roughly 95 horsepower
- Fuel-injected 22R-E: roughly 105 horsepower
These figures come from factory ratings common to North American and other markets in the late 1980s and can vary slightly due to emission specifications, market, and testing standards.
Understanding the numbers
horsepower ratings from this era often reflect the transition from carbureted setups to electronic fuel injection. Many sources note that the carbureted 22R delivered about 95 hp, while the EFI-equipped 22R-E delivered a bit more, around 105 hp. Differences in measurement standards (SAE gross vs. SAE net) and regional tuning can cause small variations in the published numbers.
Why the difference mattered for drivers
The horsepower gap between the two variants translated into noticeably different performance in everyday driving, especially when carrying payloads or climbing grades. The EFI version generally offered smoother throttle response and a more consistent power delivery, which could translate to quicker acceleration and more confident highway performance, particularly in higher-altitude conditions.
What this means for collectors and restorers
When assessing a 1988 Toyota Pickup, knowing which engine is installed is key. Carbureted 22R engines are often favored by purists for their simplicity and ease of tuning, while EFI 22R-E engines are valued for better fuel economy and driveability. If you are restoring or evaluating a purchase, verify the engine type and consult the vehicle’s VIN and emissions stickers to confirm the correct horsepower rating for that specific truck.
Summary
The 1988 Toyota Pickup offered two 2.4-liter four-cylinder powerplants. The carbureted 22R delivered about 95 horsepower, while the EFI-equipped 22R-E produced around 105 horsepower. Variations can occur due to market-specific tuning, emission standards, and the condition of the engine, but these figures capture the typical factory ratings from that year. Understanding which engine your truck has helps set expectations for performance and restoration goals.
How much horsepower does a 22R have?
The Toyota 22R engine typically produces around 96–108 horsepower, depending on the specific model year and emissions regulations. Early versions of the engine were closer to 96 hp, while later models saw an increase to the 105–108 hp range. The 22R engine was designed for reliability and torque rather than high horsepower, producing about 128 lb-ft of torque, which made it well-suited for towing and hauling.
- Horsepower: Ranges from approximately 96 hp in earlier models to up to 108 hp in later ones.
- Torque: Produces around 128 lb-ft of torque.
- Engine focus: Tuned for low-end torque, prioritizing durability and drivability over high-revving power.
Is a Toyota 22R a good engine?
The 22re is a solid motor. It's a 4 cylinder so it doesn't have the most power. It is reliable and good on fuel. It's a proven motor and if you are not pulling a trailer or always fully loaded you will be fine. You don't need to be in the front of the pack, but you will always be there with minimal maintenence.
How much is a 1988 Toyota pickup worth today?
The value of a 1988 Toyota Pickup SR5 can vary greatly depending on its condition, mileage, options, and history. Typically, you can expect to pay around $12,742 for a 1988 Toyota Pickup SR5 in good condition with average spec.
How much horsepower does a 1988 22R have?
The turbocharged 22R-TE (sold from late 1985 through 1988) produced 101 kW (135 hp; 137 PS) at 4,800 rpm and 234 N⋅m (173 lb⋅ft) at 2,800 rpm. These engines are extremely well known for their durability, decent fuel efficiency and good low to mid range torque.
