How much horsepower does a 2010 4.6 Crown Victoria Police Interceptor have?
The 2010 Crown Victoria Police Interceptor is powered by Ford’s 4.6-liter V8 and is rated at about 250 horsepower.
Understanding this figure helps explain why the CVPI remained a common police car through the late 2000s and into the 2010s. The 2010 model uses Ford’s modular 4.6L V8 with SOHC design and two valves per cylinder, tuned for reliability and steady, dependable performance under patrol duty.
Engine and power profile
Engine configuration
The CVPI’s heart is a 4.6-liter Modular V8. In the 2010 police interceptor, it is a single-overhead-cam (SOHC) two-valve-per-cylinder design that prioritizes low-end torque and durability over high-revving output.
The official horsepower rating is 250 hp at 4,750 rpm, with torque configured to provide robust response at typical patrol speeds. The engine is paired with a heavy-duty automatic transmission and reinforced driveline to endure the demands of daily police use.
The following specs summarize the engine’s performance characteristics that matter most for everyday use and pursuit driving.
- Horsepower: 250 hp @ 4,750 rpm
These numbers come from Ford’s standard ratings for the Crown Victoria Police Interceptor’s 4.6-liter V8. In real-world police duty, power output can be influenced by load, tires, altitude, and drivetrain tuning.
Why horsepower matters in a police sedan
Headline horsepower translates to acceleration and top speed, but police vehicle performance also depends on torque, gearing, suspension, and braking. The CVPI is known for strong low-end torque that helps with quick response from a standstill, rapid acceleration in pursuits, and stable highway performance. The engine’s rating sits alongside a heavy, reinforced chassis and purpose-built components designed for extended patrol duty.
Summary
In short, the 2010 Crown Victoria Police Interceptor delivers about 250 horsepower from its 4.6-liter V8, a figure that reflects its focus on reliability, durability, and steadier performance for everyday patrol duties. When combined with the CVPI’s gearing, torque characteristics, and chassis design, it remains a durable workhorse for police fleets, even as newer patrol options emerge.
How fast is the Crown Vic Police Interceptor?
The top speed of a Ford Crown Victoria Police Interceptor varies by model year, but is typically between 120-130 mph, with later models (2006-2011) electronically limited to a slightly higher 140 mph. Earlier models had a lower top speed of around 124 mph. Factors like axle ratio also affect top speed and acceleration, with a 3.27 ratio allowing for a higher top speed than a 3.55 ratio.
- Early models: Approximately 124 mph.
- Later models (2006-2011): Electronically limited to 140 mph.
- Axle ratio impact:
- 3.27:1 ratio: Can reach up to 129 mph.
- 3.55:1 ratio: Limited to 119 mph.
How much HP does a 4.6 Police Interceptor have?
Engine and drivetrain
The CVPI is powered by a 4.6 liter V8 engine producing 250 hp (186 kW) and 297 ft·lb (403 N·m) of torque that is mated to a four-speed automatic transmission.
How much horsepower does a 2010 Crown Victoria Police Interceptor have?
The 2010 Ford Crown Victoria Police Interceptor has 250 horsepower. It is powered by a 4.6L Flex Fuel V8 engine that also produces 297 ft-lb of torque. This police-specific model featured a heavy-duty suspension, cooling system, and other components in addition to the upgraded V8 engine.
You can watch this video to learn more about the 2010 Ford Crown Victoria Police Interceptor's engine: 1mLOVE WHAT YOU DRIVEYouTube · Aug 13, 2023
- Horsepower: 250 hp at 4900-5000 RPM
- Torque: 297 ft-lb at 4000 RPM
- Engine: 4.6L Flex Fuel V8
- Transmission: 4-speed automatic
- Features: Heavy-duty suspension, brakes, cooling system, and other police-specific upgrades
What is the horsepower of a Crown Victoria police interceptor?
The Ford Crown Victoria Police Interceptor (CVPI) typically has a 4.6L V8 engine producing 250 horsepower at around 4900-5000 RPM. This engine also generates approximately 297 pound-feet of torque at 4000-4100 RPM. The CVPI engine was an enhanced version of the standard 4.6L V8 to provide more power for police duties.
This video shows a dyno test of a Crown Vic Police Interceptor: 59sLate Model Restoration (LMR)YouTube · Apr 22, 2022
- Horsepower: 250250250 hp @ 4900−50004900 minus 50004900−5000 RPM
- Torque: 297297297 lb-ft @ 4000−41004000 minus 41004000−4100 RPM
- Engine: 4.6L4.6 cap L4.6𝐿 V8
- Transmission: 4-speed automatic
- Drivetrain: Rear-wheel drive
You can watch this video to learn more about the Crown Victoria Police Interceptor: 59sAMERICAN AUTOSYouTube · Jul 10, 2024
