How much is a brake job on an impala?
Expect a brake job on a Chevy Impala to cost roughly $300 to $1,200, depending on whether you replace pads only or also rotors, if calipers need replacement, and whether you do both axles. Local labor rates and part choices will influence the final price.
What affects the price
Brake service costs are driven by parts, labor, and the condition of the braking system. Key variables include the type of parts chosen (OEM vs aftermarket), whether rotors are replaced or resurfaced, the number of axles serviced, and any additional work required (caliper replacement, fluid flush, or ABS diagnostics).
Brake system baseline components
Understanding what is commonly involved helps explain the prices you’ll see on an estimate.
- Pads: quality varies from economy to premium; higher-quality pads can last longer and be quieter but cost more upfront.
- Rotors: some jobs replace rotors; others simply resurface. Replacing rotors adds to the price.
- Calipers: occasional sticking or failure requires replacement, which substantially increases cost.
- Brake fluid and hardware: a fluid flush and new hardware can add to the bill.
- Labor: labor rates vary by region and shop; dealership rates are typically higher than independent shops.
- Vehicle configuration: front brakes are usually larger and more labor-intensive than rear; some Impala generations use rear drum brakes, which changes the service steps and costs.
Conclusion: The final price is a function of parts, labor, and any additional repairs required during service.
Typical price ranges for an Impala brake job
Prices vary by region and shop, but these ranges reflect common quotes as of 2025 for standard brake service on a Chevrolet Impala. The figures assume no major underlying problems like seized calipers or damaged rotors beyond service limits.
- Pads only (per axle): typically $150 to $300 for a single axle; front axle brakes are usually more expensive due to larger rotors and pads.
- Pads and rotors (per axle): typically $300 to $800 per axle; cost depends on whether OEM or aftermarket parts are used and on rotor size.
- Both axles (pads + rotors on both ends): typically $600 to $1,200 total, depending on part choices and whether rotors are replaced on both sides.
- Caliper replacement (per caliper, if needed): $200 to $600 or more; labor and part costs rise with multiple calipers.
- Brake fluid flush and system bleed: $60 to $120; sometimes included in a full brake service.
Factor in tax, shop fees, disposal fees, and possible wheel hub or bearing repairs if seized calipers have caused additional damage.
What Impala owners should know
As the Impala has been produced across many generations, the brake setup has varied. Some older models used rear drum brakes, which affects costs and service steps. Always ask for a detailed written estimate that itemizes pads, rotors, and any caliper service, plus a note on whether rotors will be resurfaced or replaced.
Getting an estimate
To get an accurate quote, request a shop inspection and diagnostic, especially if you're hearing squealing, grinding, or your ABS light is on. A technician will inspect pad thickness, rotor condition, caliper function, brake lines, and fluid condition.
Conclusion: A careful inspection will determine whether you need pads only or full rotor replacements, and if calipers or lines require replacement, which drives final pricing.
Summary
Brake service for a Chevy Impala typically ranges from around $300 to $1,200, depending on whether you replace pads only or pad-and-rotor sets across one or both axles, and whether calipers or other repairs are needed. Always obtain a written estimate with line-item pricing and confirm whether rotors will be resurfaced or replaced. Location and shop choice significantly influence final costs. For budgeting, plan on roughly mid-range values ($400–$900) for a standard two-axle job at an independent shop.
